Service manual

P1165E&P5260E 13
Step Figure Description
1
Preparation: Press the power
button to shutdown the
projector and disconnect the
power cord.
Flip the projector and remove
the screws (6ea) as the photo
showing, then turn over the
projector to take off the top
cover.
Note: 1. If the lamp is hot,
please do not start any
procedure until the lamp
cools down. 2. If you feel the
top cover is hard to take off,
try to open the lamp cover
first then take the cover off.
How to open the lamp cover?
Refer to 3.3 Disassembly Lamp
Module.
3. When taking off the top
cover, take care of the flex
wire. Disconnect the wire first
(as the photo showing).
S1*6
Top cover
C1
Bottom cover assembly
C2