Acer Projector P1273/P1273n/P1276/P1373W/ P1273B/P1273i/P1373WB Series User's Guide
Copyright © 2013. Acer Incorporated. All Rights Reserved. Acer Projector P1273/P1273n/P1276/P1373W/P1273B/P1273i/P1373WB Series User's Guide Original Issue: 03/2013 Changes may be made periodically to the information in this publication without obligation to notify any person of such revisions or changes. Such changes will be incorporated in new editions of this manual or supplementary documents and publications.
iii Information for your safety and comfort Read these instructions carefully. Keep this document for future reference. Follow all warnings and instructions marked on the product. Turning the product off before cleaning Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
iv • • To avoid damage of internal components and to prevent battery leakage, do not place the product on a vibrating surface. Never use it under sporting, exercising, or any vibrating environment which will probably cause unexpected short current or damage rotor devices, lamp. Using electrical power • • • • • This product should be operated from the type of power indicated on the marking label. If you are not sure of the type of power available, consult your dealer or local power company.
v Product servicing Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage points or other risks. Refer all servicing to qualified service personnel.
vi • • • • • • • • • • • • • • • • • • might cause fire or electric shock. In this case, unplug immediately and contact your dealer. Do not keep using this product to break or drop it. In this case contact your dealer for inspection. Do not face the projector lens to the sun. It can lead to fire. When switching the projector off, suggest to ensure the projector completes its cooling cycle before disconnecting power.
vii Caution for Listening To protect your hearing, follow these instructions. • • • • • Increase the volume gradually until you can hear clearly and comfortably. Do not increase the volume level after your ears have adjusted. Do not listen to music at high volumes for extended periods. Do not increase the volume to block out noisy surroundings. Decrease the volume if you can't hear people speaking near you. Disposal instructions Do not throw this electronic device into the trash when discarding.
viii First things first Usage Notes Do: • Turn off the product before cleaning. • Use a soft cloth moistened with mild detergent to clean the display housing. • Disconnect the power plug from AC outlet if the product is not being used for a long period of time. Don't: • Block the slots and openings on the unit provided for ventilation. • Use abrasive cleaners, waxes or solvents to clean the unit. • Use under the following conditions: • • • • In extremely hot, cold or humid environments.
First things first iii viii Usage Notes viii Precautions viii Introduction 1 Product Features 1 Package Overview 2 Projector Overview 3 Projector Outlook 3 Control Panel 5 Remote Control Layout 6 Getting Started Connecting the Projector Turning the Projector On/Off 8 8 10 Turning on the Projector 10 Turning the projector off 11 Adjusting the Projected Image 12 Adjusting the Height of Projected Image 12 How to optimize image size and distance 13 How to get a preferred image si
How to login in 34 Home 35 Control Panel 35 Network Setting 36 Alert Setting 36 Logout 37 Appendices 38 Troubleshooting 38 LED & Alarm Definition Listing 43 Cleaning and replacing the dust filters 44 Replacing the Lamp 45 Ceiling Mount Installation 47 Specifications 50 Compatibility modes 52 Regulations and safety notices 56
1 Product Features This product is a single-chip DLP® projector. Outstanding features include: • DLP® technology • P1273/P1273n/P1276/P1273B/P1273i series : Native 1024 x 768 XGA resolution 4:3 / 16:9 aspect ratio supported • P1373W/P1373WB series : Native 1280 x 800 WXGA resolution Full/4:3/16:9/L.
Package Overview This projector comes with all the items shown below. Check to make sure your unit is complete. Contact your dealer immediately if any thing is missing. MENU SOURC E TEMP R E S YNC LAMP POWER English 2 Projector Power cord VGA cable Security card 2 x Batteries Carrying case SOURCE 3, ©201 Acer Inc. All rights reserve d. ZOOM FREEZE HIDE MEDIA P1276/ P1373W/B/ P1273/n/B/i SETUP Series Acer Projector P/N:MC.JG811.
3 English Projector Overview Projector Outlook Front / upper side 2 3 1 4 MENU SOUR 6 5 CE TEMP R E S YNC LAMP POWE R 7 8 # Description # 5 Description 1 Power button Zoom lens 2 Control panel 6 Remote control receiver 3 Zoom lever 7 Tilt adjusting wheels 4 Focus ring 8 Security bar Rear side 1 2 P1373WB/P1273B/ P1273i 16 3 4 12 5 6 7 13 8 9 10 11 14 15 16 P1273n P1273/P1276/P1373W Note: Connector interface is subject to model's specifications.
English 4 # Description # Description 1 LAN (RJ45 Port for 10/100M Ethernet) (P1273n/P1373WB/P1273B/P1273i only) 9 S-Video input connector 2 1st USB connector (USB A1) 10 Audio input connector 3 2nd USB connector (USB A2) 11 RS232 connector 4 Mini USB connector (USB B) 12 Power socket 5 HDMI connector 13 PC analog signal/HDTV/component video input connector (VGA IN 2) 6 Monitor loop-through output connector 14 (VGA-Out) KensingtonTM lock port 7 PC analog signal/HDTV/component v
5 1 8 2 English Control Panel 3 4 5 9 12 10 6 7 P1273/P1276/P1273n/P1373W # 11 Icon 5 P1273B/P1373WB/P1273i Function Description 1 POWER Power Indicator LED 2 LAMP Lamp Indicator LED 3 TEMP Temp Indicator LED 4 RESYNC Automatically synchronizes the projector to the input source. 5 SOURCE Changes the active source. 6 POWER See the contents in "Turning the Projector On/Off" section. 7 Empowering key Unique Acer functions: e3D, eView, eTimer, ePower Management.
English 6 Remote Control Layout 1 25 3 2 SOURCE 5 ZOOM 7 FREEZE HIDE 6 ZOOM 8 MEDIA RATIO SETUP 9 SOURCE 4 HIDE 26 SETUP 10 11 FREEZE MEDIA 12 13 14 Model No:E-26141 15 16 17 18 19 20 21 22 23 24 E-26110 LASER MODULE : M-5.2-6.5x10-5.5x5.5 BONTECH ELECTRONICS(K.S) CO ., LTD . No. 2018, Zhonghuayuan west road, Yushan town,Kunshan city, China MC.JG811.001 MC.JG811.
7 Icon Function Description KEYSTONE Adjusts the image to compensate for distortion caused by tilting the projector (± 40 degrees). 13 Four directional select keys Use up, down, left, right buttons to select items or make adjustments to your selection. 14 Pre./ Rewind Press "Pre./Rewind" to go to previous index or press continuously to rewind the playing media file. Enter/ Play/ Pause Press "Enter/Play/Pause" to play/pause media file.
Getting Started Connecting the Projector S-Video Output 6 DVD player, Set-up Box, HDTV receiver DVD player HDMI D-Sub W R D-Sub 8 5 3 7 RS232 4 USB 5 13 USB English 8 HDMI D-Sub D-Sub 12 RS232 USB Y 9 2 7 HDTV adapter R W 1 R B G 11 Internet 10 Description # Y # Video Output R B G DVD player, Set-up Box, HDTV receiver Description 1 Power cord 8 RS232 cable 2 LAN cable 9 VGA to component/HDTV adapter 3 USB cable 10 3 RCA component cable 4 HDMI cable 11 C
9 English Note: To ensure the projector works well with your computer, please make sure the timing of the display mode is compatible with the projector. Note: Connector interface is subject to model's specifications. Note: USB cable needs powered extender if the length is over 5 m.
Turning the Projector On/Off Turning on the Projector 1 Ensure that the power cord and signal cable are securely connected. The Power indicator LED will flash red. 2 Turn on the projector by pressing "Power" button on the control panel, and the Power indicator LED will turn blue. 3 Turn on your source (computer, notebook, video player ,etc.). The projector will detect your source automatically.
11 1 To turn the projector off, press the power button. This message appears: "Please press the power button again to complete the shutdown process." Press the power button again. 2 The LED power indicator will turn RED and blink rapidly after the projector is turned off, and the fan(s) will continue to operate for about 2 minutes to ensure that the system cools properly.
English 12 Adjusting the Projected Image Adjusting the Height of Projected Image The projector is equipped with tilt adjusting wheels for adjusting the height of image. To raise/lower the image: Use Tilt adjusting wheels to fine-tune the display angle.
13 English How to optimize image size and distance P1273/P1273n/P1273B/P1273i/P1276 series Consult the table below to find the optimal image sizes achievable when the projector is positioned at a desired distance from the screen. Example: If the projector is 2.0 m from the screen, good image quality is possible for image sizes between 46" and 50". Note: Remind as below figure, the space of 88 cm height is required when located at 2.0 m distance.
English 14 P1273/P1273n/P1273B/P1273i/P1276 series Screen size Top Screen size Top Desired (Min zoom) (Max zoom) Distance From base From base to (m) Diagonal Diagonal to top of top of image (inch) W (cm) x H (cm) (inch) W (cm) x H (cm) image (cm) (cm) 1 23 47 x 35 40 25 51 x 38 44 2 46 93 x 70 80 50 103 x 77 88 2.5 57 116 x 87 100 63 128 x 96 111 3 69 140 x 105 120 76 154 x 115 133 3.
15 Example: If the projector is 2 m from the screen, good image quality is possible for image sizes between 55" and 60". Note: Remind as below figure, the space of 90 cm height is required when located at 2 m distance. Ma x scre en s Min ize scre en size Height: 90 cm from base to top of image Height: 82 cm 2.0 m Desired Distance Figure: Fixed distance with different zoom and screen size.
English 16 P1373WB/P1373W series Screen size Top Screen size Top Desired (Min zoom) (Max zoom) Distance From base From base to (m) Diagonal Diagonal to top of top of image (inch) W (cm) x H (cm) (inch) W (cm) x H (cm) image (cm) (cm) 1.5 41 88 x 55 62 45 97 x 60 68 2 55 118 x 74 82 60 129 x 81 90 2.5 68 147 x 92 103 75 161 x 101 113 3 82 176 x 110 124 90 194 x 121 135 3.
17 P1273/P1273n/P1273B/P1273i/P1276 series A 50" Desired image size D Height from base to top of image 2.0 m 2.2 m C B Desired Distance The table below shows how to achieve a desired image size by adjusting either the position or the zoom ring. For example: to obtain an image size of 50" set the projector at a distance 2.0 m and 2.2 m from the screen and adjust the zoom level accordingly.
English 18 P1273/P1273n/P1273B/P1273i/P1276 series Desired Image Size Distance (m) Top (cm) Diagonal (inch) W (cm) x H (cm) Max zoom Min zoom From base to top of image 30 61 x 46 1.2 1.3 53 40 81 x 61 1.6 1.7 70 50 102 x 76 2.0 2.2 88 60 122 x 91 2.4 2.6 105 70 142 x 107 2.8 3.1 123 80 163 x 122 3.2 3.5 140 90 183 x 137 3.6 3.9 158 100 203 x 152 4.0 4.4 175 120 244 x 183 4.8 5.2 210 150 305 x 229 5.9 6.6 263 180 366 x 274 7.1 7.
19 English P1373WB/P1373W series A 60" Desired image size D Height from base to top of image 2.0 m 2.2 m C B Desired Distance The table below shows how to achieve a desired image size by adjusting either the position or the zoom ring. For example: to obtain an image size of 60" set the projector at a distance 2.0 m and 2.2 m from the screen and adjust the zoom level accordingly.
English 20 P1373WB/P1373W series Desired Image Size Distance (m) Top (cm) Diagonal (inch) W (cm) x H (cm) Max zoom Min zoom From base to top of image 30 65 x 40 1.0 1.1 45 40 86 x 54 1.3 1.5 60 50 108 x 67 1.7 1.8 76 60 129 x 81 2.0 2.2 91 70 151 x 94 2.3 2.6 106 80 172 x 108 2.7 2.9 121 90 194 x 121 3.0 3.3 136 100 215 x 135 3.3 3.7 151 120 258 x 162 4.0 4.4 181 150 323 x 202 5.0 5.5 226 180 388 x 242 6.0 6.
21 Installation menu The installation menu provides an onscreen display (OSD) for projector installation and maintenance. Use the OSD only when the message "No signal input" is displayed on the screen. The menu options include settings and adjustments for screen size and distance, focus, keystone correction and more . 1 Turn on the projector by pressing "Power" button on the control pad. 2 Press the menu button on the control pad to launch the OSD for projector installation and maintenance.
English 22 Acer Empowering Technology Acer Empowering Key provide four Acer unique functions, they are "Acer eView Management", "Acer eTimer Management", "Acer ePower Management" and "Acer e3D Management respectively. Press " " key to launch the Onscreen display main menu to modify its function. When the Empowering Menu is displayed, use the " menu. " key to select the main Acer eView Management "Acer eView Management" is for display mode selection.
23 The projector has multilingual OSD that allow you to make image adjustments and change a variety of settings. Using the OSD menus • To open the OSD menu, press "MENU" on the remote control or control panel. • When the OSD is displayed, use the keys to select any item in the main menu. After selecting the desired main menu item, press submenu for feature setting. • Use the using the to enter keys to select the desired item and adjust the settings by keys.
English 24 Color Display Mode There are many factory presets optimized for various types of images. • • • • • • • • Bright: For brightness optimization. Presentation: For meeting presentation. Standard: For common environment. Movie: For brighter and general movie/video/photo playing. Dark Cinema: For dark movie content. Game: For game content. Sports: For sport picture. User: Memorize user's settings. Wall color Use this function to choose a proper color according to the wall.
25 Mode Use this function to choose CT1 (5500K), CT2 (6500K, Native), CT3 (7500K), User mode. R Gain Adjusts the red gain for color temperature optimization. G Gain Adjusts the green gain for color temperature optimization. B Gain Adjusts the blue gain for color temperature optimization. Dynamic Black Choose "On" to automatically optimize the display of dark movie scenes enabling them to be shown in incredible detail.
English 26 Image Projection Mode • Front: The factory default setting. • Rear: Reverses the image so you can project from behind a translucent screen. • Auto: Automatically adjusts projection location of image. • Desktop • Ceiling: Turns the image upside down for ceiling-mounted projection. Projection Location Aspect Ratio Use this function to choose your desired aspect ratio.
27 • Press to move the image left. • Press to move the image right. V. Position (Vertical position) • Press to move the image down. • Press to move the image up. Frequency "Frequency" changes the projector's refresh rate to match the frequency of your computer’s graphics card. If you can see a vertical flickering bar in the projected image, use this function to make the necessary adjustments. Tracking Synchronizes the signal timing of the projector with the graphics card.
English 28 Setting Startup Screen Use this function to select your desired startup screen. If you change the setting, the changes will take effect when you exit the OSD menu. • Acer: The default startup screen of your Acer projector. • User: Use memorize picture from "Screen Capture" function. Screen Capture Use this function to customize the startup screen. To capture the image that you want to use as the startup screen, follow the instructions below.
29 Security This projector provides a useful security function for the administrator to manage usage of the projector . Press to change the "Security" setting. If the security function is enabled, your must enter the "Administrator Password" first before changing the security settings. • Select "On" to enable the security function. The user has to enter a password to operate the projector. Please refer to the "User Password" section for details.
30 English Administrator Password The "Administrator Password" can be used in both the "Enter Administrator Password" and "Enter Password" dialog boxes. • • Press to change the "Administrator Password". The factory default of "Administrator Password" is "1234". If you forgot your administrator password, do the following to retrieve the administrator password: • An unique 6-digit "Universal Password" which is printed on the Security Card (please check accessory in the box).
31 English Management ECO Mode Choose "On" to dim the projector lamp which will lower power consumption, extend the lamp life and reduce noise. Choose "Off" to return normal mode. High Altitude Choose "On" to turn on High Altitude mode. Operate the fans at full speed continuously to allow for proper high altitude cooling of the projector. Turn Off Mode • • Auto Shutdown Instant Off: Shuts down the projector without fan cooling.
English 32 Mute • • Power On/Off Volume Select this function to adjust the notification volume when turning the projector on/off. Alarm Volume Select this function to adjust the volume of any warning notifications. Choose "On" to mute the volume. Choose "Off" to restore the volume. 3D 3D Choose "On" to enable DLP 3D function. • On: Choose this item while using DLP 3D glasses, 120Hz 3D capable graphics cards and HQFS format file or DVD with corresponding SW player. • Off: Turn off 3D mode.
33 Language Language Choose the multilingual OSD menu. Use the select your preferred menu language. • Press to confirm the selection. or key to English - DDD TriDef Media Player (Trial): http://www.tridef.com/download/TriDef-3-D-Experience-4.0.2.html Note: "3D L/R Invert" is only available when 3D is enabled. Note: There has reminder screen if 3D still enable when power on projector. Please adjust setting depended on your purpose.
English 34 Acer LAN webpage management How to login in Open browser and enter the Server IP address by 192.168.100.10 to find below homepage of acer LAN webpage management. A password is needed to login in before using. Select a user. Administrator is with high authority that can process more operations such as network setting and alert setting. Default password of administrator is "admin". And User is with normal authority with default password by "user".
35 Home page shows connection status and you can find three main functions listed, Control Panel, Networking Setting and Alert Setting. Note: Control Panel and Network Setting are only for Administrator account. Control Panel Enduser can control and adjust projector setting value via this page.
English 36 Network Setting Enduser can set IP address, group name and password as wish. After change network configurations or password, projector will reboot automatically after press "Apply". Note: Group Name and projector Name must be less then 32 characters. Alert Setting Enduser can send mail with error message right away if projector has problem.
37 After tap Logout, you will return to login page within 5 seconds.
English 38 Appendices Troubleshooting If you experience a problem with your Acer projector, refer to the following troubleshooting guide. If the problem persists, please contact your local reseller or service center. Image Problems and Solutions # 1 2 Problem No image appears onscreen Partial, scrolling or incorrectly displayed image (for PC (Windows 2000/XP/Vista/ Windows 7/ Windows 8)) Solution • Connected as described in the "Getting Started" section.
39 4 5 6 7 Partial, scrolling or incorrectly displayed image (For notebooks) The screen of the notebook computer is not displaying your presentation Image is unstable or flickering Image has vertical flickering bar Image is out of focus • Press "RESYNC" on the remote control or control panel. • For an incorrectly displayed image: • Follow the steps for item 2 (above) to adjust the resolution of your computer. • Press the toggle output settings.
English 40 8 9 10 11 Image is stretched when displaying a "widescreen" DVD title Image is too small or too large Image has slanted sides Image is reversed When you play a DVD encoded in anamorphic or 16:9 aspect ratio you may need to adjust the following settings: • If you play a 4:3 format DVD title, please change the format to 4:3 in the projector OSD. • If the image is still stretched, you will also need to adjust the aspect ratio.
41 # 1 Condition Message Message Reminder Fan Fail - the system fan is not working. Projector Overheated - the projector has exceeded its recommended operating temperature and must be allowed to cool down before it may be used. Replace the lamp - the lamp is about to reach its maximum lifetime. Prepare to replace it soon.
English 42 Problems with the Projector # Condition Solution 1 The projector stops responding to all controls If possible, turn off the projector, then unplug the power cord and wait at least 30 seconds before reconnecting power. 2 Lamp burns out or makes a popping sound When the lamp reaches the end of its useful life, it will burn out and may make a loud popping sound. If this happens, the projector will not turn on until the lamp module has been replaced.
43 English LED & Alarm Definition Listing LED Messages Lamp LED Temp LED Power LED Red Red Red Blue Standby (power cord plugged in) -- -- V -- Power button ON -- -- -- V Lamp retry -- -- -- Quick flashing Turning off (cooling state) -- -- Quick flashing -- Turning off (cooling completed) -- -- V -- Error (thermal failure) -- V -- V Error (fan lock failure) -- Quick flashing -- V Error (lamp breakdown) V -- -- V Error (color Wheel fail) Quick flashing -- --
English 44 Cleaning and replacing the dust filters Cleaning the dust filters Clean the dust filters after every 1000 hours of use. If they are note cleaned periodically, they can become clogged with dust, preventing proper ventilation. This can cause overheating and damage the projector. PO W ER RE M NC LA SY P TE M P M EN SO U UR CE 1 PO W ER RE M NC LA SY P TE M P M EN SO U UR CE 2 Follow these steps: 1 2 3 4 5 Turn the projector off.
45 Use a screwdriver to remove the screw(s) from the cover, and then pull out the lamp. The projector will detect the lamp life. You will be shown a warning message "Lamp is approaching the end of its useful life in full power operation. Replacement suggested!" When you see this message, change the lamp as soon as possible. Make sure the projector has been cooling down for at least 30 minutes before changing the lamp. Warning: The lamp compartment is hot! Allow it to cool down before changing the lamp.
English 46 To Change the Lamp 1 Turn off the projector by pressing the power button. 2 Allow the projector at least 30 mins to cool down. 3 Disconnect the power cord. 4 Open the screw cover on the right side of the projector. (Illustration #1) 5 Use a screwdriver to loosen the screw on the right side of the projector. (Illustration #2) 6 Push and slide the top cover (Illustration #3) and then open the top cover.
47 If you wish to install the projector using a ceiling mount, please refer to the steps below: Drill four holes into a solid, structurally sound part of the ceiling, and secure the mount base. m m m 13 m 20 1 .9 49mm mm 8.4 130 mm Note: Screws are not included. Please obtain the appropriate screws for your type of ceiling. 2 Secure the ceiling rod using the appropriate type of four-cylinder screws.
English 48 3 Use the appropriate number of screws for the projector size to attach the projector to the ceiling mount bracket. Screw Type B Smaller Washer Large Washer Projector Bracket Supports projector and allows for adjustments Spacer - For heat dissipation Note: It is recommended that you keep a reasonable space between the bracket and the projector to allow for proper heat distribution. Use two washers for extra support, if deemed necessary. 4 Attach the ceiling bracket to the ceiling rod.
49 Adjust the angle and positioning as necessary. English 5 Tightening Screw Allen Key Allen Key Tightening Screw Note: The appropriate type of screw and washer for each model is listed in the table below. 3 mm diameter screws are enclosed in the screw pack. Models Screw Type B P1273/P1273n/P1276/P1373W/ P1273B/P1273i/P1373WB Washer Type Diameter (mm) Length (mm) Large Small 3 20 V V 75.28 mm 82.30 mm 55.00 mm 55.00 mm SCREW SPEC.
English 50 Specifications The specifications listed below are subject to change without notice. For final specs, please refer to Acer's published marketing specifications.
51 P1273/P1273n/P1273B/P1273i/P1373WB/P1373W: Normal mode: 235W ± 10% @ 110VAC ECO mode: 197W ± 10% @ 110VAC Standby mode < 0.5W P1276: Normal mode: 305W ± 10% @ 110VAC ECO mode: 240W ± 10% @ 110VAC Standby mode < 0.
English 52 Compatibility modes A. VGA Analog 1 VGA Analog - PC Signal Modes VGA SVGA XGA SXGA QuadVGA SXGA+ UXGA PowerBook G4 i Mac DV (G3) Resolution 640x480 640x480 640x480 640x480 640x480 800x600 800x600 800x600 800x600 800x600 800x600 1024x768 1024x768 1024x768 1024x768 1024x768 1152x864 1152x864 1152x864 1280x1024 1280x1024 1280x1024 1280x1024 1280x960 1280x960 1400x1050 1600x1200 640x480 640x480 800x600 1024x768 1152x870 1280x960 1024x768 V.Frequency [Hz] 60 72 75 85 119.
53 VGA Analog - Extended Wide timing Modes WXGA UWXGA 3 Resolution 1280x768 1280x768 1280x768 1280x720 1280x800 1440x900 1680x1050 1366x768 1920x1080-RB 1920x1200-RB V.Frequency [Hz] 60 75 85 60 60 60 60 60 60 60 (59.95) H.Frequency [KHz] 47.78 60.29 68.63 44.80 49.60 55.90 65.30 47.71 66.60 74.04 VGA Analog -Component Signal Modes 480i 480p 576i 576p 720p 720p 1080i 1080i 1080p 1080p 1080p 1080p Graphic source monitor range limits Resolution V.Frequency [Hz] 720x480 59.94 (29.97) 720x480 59.
English 54 SVGA XGA PowerBook G4 i Mac DV (G3) 2 640x480 800x600 800x600 800x600 800x600 800x600 800x600 1024x768 1024x768 1024x768 1024x768 1152x864 1152x864 1280x1024 1280x1024 1280x1024 1280x1024 1280x960 640x480 640x480 800x600 1024x768 1152x870 1280x960 1024x768 119.51 56 60 72 75 85 119.85 60 70 75 119.804 75 85 60 72 75 85 75 60 66.6(67) 60 60 75 75 75 61.61 35.20 37.88 48.08 46.88 53.67 77.20 48.36 56.48 60.02 98.80 67.50 77.10 64.00 77.90 79.98 91.15 75.00 31.50 35.00 37.88 48.36 68.68 75.
55 HDMI - Video Signal Modes 480i 480p 576i 576p 720p 720p 1080i 1080i 1080p 1080p 1080p 1080p 1080p Graphic source monitor range limits Resolution V.Frequency [Hz] 720x480 59.94 (29.97) 720x480 59.94 720x576 50(25) 720x576 50 1280x720 60 1280x720 50 1920x1080 60(30) 1920x1080 50(25) 1920x1080 60 1920x1080 50 1920x1080 24 1920x1080 23.97 1920x1200-RB 60(59.95) Horizontal scan rate: Vertical scan rate: Max. pixel rate: H.Frequency [KHz] 15.70 31.47 15.60 31.25 45.00 37.50 33.75 28.10 67.50 56.25 27.
English 56 Regulations and safety notices FCC notice This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Cet appareil numérique de la classe B est conforme a la norme NMB-003 du Canada. Declaration of Conformity for EU countries Acer hereby declares that this projector series is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Compliant with Russian regulatory certification Radio device regulatory notice Note: The regulatory information below is for models with wireless LAN and/or Bluetooth only.
Acer Incorporated 8F, 88, Sec. 1, Xintai 5th Rd., Xizhi New Taipei City 221, Taiwan Declaration of Conformity We, Acer Incorporated 8F, 88, Sec. 1, Xintai 5th Rd., Xizhi, New Taipei City 221, Taiwan Contact Person: Mr. RU Jan, e-mail:ru.jan@acer.com And, Acer Italy s.r.l Via Lepetit, 40, 20020 Lainate (MI) Italy Tel: +39-02-939-921 ,Fax: +39-02 9399-2913 www.acer.
Acer America Corporation 333 West San Carlos St., Suite 1500 San Jose, CA 95110 U. S. A. Tel: 254-298-4000 Fax: 254-298-4147 www.acer.com Federal Communications Commission Declaration of Conformity This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.