PC2120 All-in-One 12.
Disclaimers The information in this manual has been carefully checked and is believed to be accurate. ACNODES assumes no responsibility for any infringements of patents or other rights of third parties which may result from its use. ACNODES assumes no responsibility for any inaccuracies that may be contained in this document. ACNODES makes no commitment to update or to keep current the information contained in this manual.
Safety Approvals CE Marking FCC Class A FCC Compliance This equipment has been tested and complies with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. If not installed and used in accordance with proper instructions, this equipment might generate or radiate radio frequency energy and cause harmful interference to radio communications.
Safety Precautions Before getting started, read the following important cautions. 1. The PC 2120 series does not come equipped with an operating system. An operating system must be loaded first before installing any software into the computer. 2. Be sure to ground yourself to prevent static charge when installing the internal components. Use a grounding wrist strap and place all electronic components in any static-shielded devices. Most electronic components are sensitive to static electrical charge. 3.
8. Do not open the system’s back cover. If opening the cover for maintenance is a must, only a trained technician is allowed to do so. Integrated circuits on computer boards are sensitive to static electricity. To avoid damaging chips from electrostatic discharge, observe the following precautions: 9 Before handling a board or integrated circuit, touch an unpainted portion of the system unit chassis for a few seconds. This will help to discharge any static electricity on your body.
Table of Contents Chapter 1 Introduction.....................................................1 1.1 General Description ................................................1 1.2 Specifications..........................................................2 1.2.1 Core System for PC 2120 series system with SBC85610VE ........................................................................ 2 1.2.2 System I/O outlet .................................................... 2 1.2.3 Built-in Peripherals ......................
3.9 Keyboard and Mouse............................................20 3.10 Expansion Slot ....................................................21 3.11 USB and Dallas Key Installation ........................22 3.12 System O/S and Software Installation...............22 Appendix A Power Supply Specifications ................23 Appendix B System Configuration Limitation Notice ...............................................................................................
This page does not contain any information.
PC 2120 All-in-One 12.1” TFT LCD Panel PC User’s Manual Chapter 1 Introduction This chapter contains the general information and detailed specifications of PC 2120 series. Chapter 1 includes the following sections: z General Description z System Specification z Utilities Supported z Dimensions z I/O Outlets 1.1 General Description The PC 2120 series super slim industrial panel PCs are mainly designed for industrial automation and some space-constricted embedded applications.
PC 2120 All-in-One 12.1” TFT LCD Panel PC User’s Manual Designed by the PC experts for PC professionals, the PC 2120 series are virtually the ultimate one-step solution for your space-limited applications. 1.2 Specifications 1.2.
PC 2120 All-in-One 12.
PC 2120 All-in-One 12.1” TFT LCD Panel PC User’s Manual 1.2.5 12.1" TFT LCD Specification z Display area 245(H)x184(V)(12.1" diagonal) z Resolution 1024×768 (XGA) z Pixel pitch 0.240(H)x0.240(V)(TYP.) z Contrast Ratio 200 (MIN.) z Average Luminance 150cd/m²(TYP.) z Viewing Angle θL(40 )θR(40)ΦH(10)ΦL(30) 1.2.6 Environmental z Operating Temperature Range: 0oC ~ 40oC z Relative Humidity: 20% ~ 85%; non-condensing z EMC: FCC z Safety: CE 1.2.
PC 2120 All-in-One 12.1” TFT LCD Panel PC User’s Manual 1.
PC 2120 All-in-One 12.1” TFT LCD Panel PC User’s Manual 1.5 I/O Outlets The following figure shows the I/O arrangement of the PC 2120 series.
PC 2120 All-in-One 12.
PC 2120 All-in-One 12.1” TFT LCD Panel PC User’s Manual This page does not contain any information.
PC 2120 All-in-One 12.1” TFT LCD Panel PC User’s Manual Chapter 2 System Configuration This chapter details the system parts and components with figures. Sections include: z System Major Parts z Pedestal Versatility z System Key Components 2.1 Pedestal Versatility The PC 2120 series features a versatile stand designed for various environmental applications. A complete set of pedestal is provided to make up the various stands.
PC 2120 All-in-One 12.1” TFT LCD Panel PC User’s Manual 2.1.1 Desktop Standing The standard kit that makes up a free-standing computer include: Small back metal fixtures 1 System main body 4 Cable management shroud 3 Pedestal 5 Main prop 6 Small hinge caps 2 By assembling these components to the main body of PC 2120 series, the computer stands on the table as an independent unit. This space-saving computer is commonly adapted for office automation, video conference and hotel information counter.
PC 2120 All-in-One 12.1” TFT LCD Panel PC User’s Manual 2.1.2 Vertical Wall Mounting For panel mounting only a set of mounting kit is needed, there is no pedestal kit or cable management shroud required. Please refer to the following figures.
PC 2120 All-in-One 12.1” TFT LCD Panel PC User’s Manual 2.1.3 Wall Mounting The standard kit that makes up a wall-mount unit includes: 1. System main body 2. Cable management shroud 3. Small back metal fixtures 4. Main prop 5. Rubber slip: The rubber slip has to be inserted to the top opening of the main prop to make the whole unit look complete and integrated. 6. Small hinge caps 7.
PC 2120 All-in-One 12.1” TFT LCD Panel PC User’s Manual By assembling these accessories to the main body of the PC 2120 series, the computer is mounted and forms a 30° angle to the wall as illustrated below. Such unit is commonly used in medical instrumentation, stand-alone POI system.
PC 2120 All-in-One 12.1” TFT LCD Panel PC User’s Manual 2.1.4 30o Table Standing For a 30o table-standing use, only the standard set of mounting kit is needed, there is no pedestal kit or cable management shroud required. The standard kit making up a 30o table-standing unit includes: 1. System main body 2. Cable management shroud 3. Large back metal fixtures 4. Large hinge caps 5. Main prop 6.
PC 2120 All-in-One 12.1” TFT LCD Panel PC User’s Manual Chapter 3 Hardware Installation This chapter describes the installation and the cable connection to the system connectors. See system board User’s Manual that came with your PANEL PC packaging for more details.
PC 2120 All-in-One 12.1” TFT LCD Panel PC User’s Manual 3.1 CPU The standard PC 2120 series solely uses a Pentium III/Celeron-grade supported CPU card (SBC85610VE). In further classifying the CPU cards of the other systems. 3.2 DRAM The PC 2120 series system control board, SBC85610VE, provides 2 x 168-pin DIMM supporting system memory up to 1GB. 3.3 HDD The standard packing will reserve a 3.5” hard disk drive bay.
PC 2120 All-in-One 12.
PC 2120 All-in-One 12.1” TFT LCD Panel PC User’s Manual 3.4 Three Serial Ports The PC 2120 series provides three onboard serial ports installed on the bottom rear side of the chassis. Arrangements on PC 2120 series specify COM1, COM4 providing RS-232 interface, and with its RS-422/485 interface connected to COM2. Each serial port comes with +5V/+12V power capabilities on both Pin 1 and Pin 9, ready to accommodate a wide array of serial devices such as fax modem, scanner, serial mouse, touch screen...etc.
PC 2120 All-in-One 12.1” TFT LCD Panel PC User’s Manual 3.6 VGA The PC 2120 series has an analog RGB interface connector installed on the bottom side. It is able to connect to an expansion CRT monitor, and the system can display on both the flat panel and the CRT simultaneously. Since the PC 2120 series adapts a flat panel with a resolution of 1024 x 768, simultaneous support of a CRT monitor requires the setting of the CRT’s VGA resolution to 1024 x 768 too.
PC 2120 All-in-One 12.1” TFT LCD Panel PC User’s Manual 3.8 Cash Drawer (PC 2120-610e only) The PC 2120-610e provides two cash drawer port. It can be used to control the opening and closing of the cash drawer on a POS system. The cash drawer Jack is follower Epson cash drawer spec. pin position and pin assignment are shown below.
PC 2120 All-in-One 12.1” TFT LCD Panel PC User’s Manual 3.10 Expansion Slot The PC 2120 series can be equipped with or without any expansion slot. As for the PC 2120 series, this comes as a standard system feature. If the system comes with expansion capability, then the system includes a PCI expansion riser card to accommodate a PCI device at a given time. Due to the internal space limitation, only a half-size expansion card can be adapted.
PC 2120 All-in-One 12.1” TFT LCD Panel PC User’s Manual 3.11 USB and Dallas Key Installation To install an USB device or to access a Dallas key to the system from side panel, you must get access to the connectors located on the side panel. Take off the dust/spill cap located at the side panel by pushing it downward to loosen its grip on top. Once loosened, pull the cap upward to disengage completely. 3.
PC 2120 All-in-One 12.1” TFT LCD Panel PC User’s Manual Appendix A Power Supply Specifications Introduction The power supply used in the PC 2120 series is an AT 80W open frame power supply. The specifications and features of this special power supply are listed in the following sections. Specifications z AT 80W output z Input voltage 90~132VAC (MIN.) 180~264VAC (MAX.
PC 2120 All-in-One 12.1” TFT LCD Panel PC User’s Manual Output Characteristic z Static DC load, Ripple and Noise Nominal Voltage +5V +12V -12V Total Regulation +5% +8% +10% Output Current Ripple & Noise 0.8A~8A 0.3A~3A 0.03A~0.3A 50mV 120mV 150mV z Hold-up time: 10ms at least. z Over voltage protection: From +5.6VDC to 6.
PC 2120 All-in-One 12.1” TFT LCD Panel PC User’s Manual Appendix B System Configuration Limitation Notice Processor Limitation List Processor Power Consumption Recommend +5V@6.37A/+12V@0.41A NO +5V@5.56A/+12V@0.45A YES +5V@6.15A/+12V@0.45A NO +5V@5.45A/+12V@0.42A YES +5V@6.17A/+12V@0.42A NO VIA C3-800MHz(133) +5V@4.53A/+12V@0.40A YES VIA C3-1000MHz(133) +5V@4.8A/+12V@0.40A YES VIA C3-1200MHz(133) +5V@5.2A/+12V@0.40A YES Celeron-850E Celeron-1.
PC 2120 All-in-One 12.1” TFT LCD Panel PC User’s Manual PC 2120-610 Configuration Limitation List Parts Power Consumption Remark Processor Refer to Processor Limitation List HDD +5V@0.72A/ +12V@0.35A Max. PCI slot expansion +5V@0.8A/+12@1.0A Max. USB peripheral +5V@0.5A Max. PC 2120-610e Configuration Limitation List Parts Power Consumption limitation Remark Processor Refer to Processor Limitation List HDD +5V@0.72A/ +12V@0.35A Max. PCI slot expansion +5V@0.8A/+12@1.0A Max.
