Specifications

... English

Wireless projection

Introduction

This section will introduce wireless projection function for this projector. The

wireless projection function is only available for the model which is equipped

with integrated Acer Wireless Presentation Gateway (WPG) module. Acer WPG

enables multiple users to connect to an Acer projector wirelessly. This eliminates

theneedtoplugandunplugcables,enablingmoreefcientuseofmeetingtime,

especially when there is more than one presenter in a meeting.

To perform wireless projection, you have to change the input source type to

“Wireless” by pressing the “Wireless” button on the remote control or the

“Source” button on the control panel or remote control.

System Requirements

-Operatingsystem:Windows®2000orWindows®XP

-CPU:Intel®Pentium®IIIat750MHzorequivalentwith128MBofRAM

-WirelessLAN:IEEE802.11b/genabled

-InternetBrowser:InternetExplorer5.0orabove

I/O Interface:

No. Item Description

1 Antenna connector For attaching the external antenna.

2 StatusLED Indicates the WPG’s status.

3 Reset button

A quick press on the the Reset button will reset

the WPG without changing any user's settings.

PressandholdResetbuttonformorethan4

seconds to reset the WPG to its factory default

settings.

4 Audio-out jack

For outputting audio signals received

wirelessly from the PC.

5 RJ-45Ethernetjack

For connecting the WPG to the Internet via a

LAN.