USER MANUAL 說明書 Predator Galea 330 無線耳機 Welcome 歡迎 Thank you for purchasing of our true wireless Bluetooth Earbuds. Please take sometime to read our user manual carefully And retain it for future reference.
Before You First Time Use Our Wireless Earbuds, Please Charge Them Fully. 在首次使用我們的無線耳機之前，請充分充電。 Model: PHR200 型号: PHR200 How to wear comfortably: 如何舒適佩戴 1. Take 2 earbuds out of the charge box 充電倉中拿出 2 只耳機； 2. Insert the correct earbuds into your ears 把正確的耳機戴入左右耳中； 3. Twist and Lock the earbuds in the best comfortable place, let you feel comfortable, and Hear Clearly 旋轉並鎖定耳機在最佳位置，感覺舒適並能清晰聽到。 Keep Clean of the Earbuds: 保持耳機清潔 A: Clean the charge contacts weekly with an alcohol pad for reliable charge.
Specifications: 規格 1. Bluetooth Version: BT5.3 藍牙版本：BT5.3 2. Support: HSP/HFP/AVRCP/A2DP 支援格式： HSP/HFP/AVRCP/A2DP 3. Transmission Range: 10m/33 feet in open space 傳輸距離：10M 4. Distortion: <1% 失真率：< 1% 5. Earbuds Playback Time: about 4hours 耳機播放時間：4 個小時 (High quality music and volume may accelerate battery consumption) （高品質的音樂和音量可能會加速電池消耗） 6. 8. Earbud Charging Time: about 2 hours; 耳機充電時間：約 2 小時； 7.
（如果耳機上面沒有紅色光，請使用酒精棉片擦拭 2 只耳機充電口和充電倉充電拼腳，以確保耳機和充電倉完全接觸） The 2 earbuds playtime is 4 hours, the charging case can charge the earbuds for 4 times, so u can get 16 hours total playtime with charge box. 兩隻耳機的播放時間是 4 小時，充電倉可以給耳機充電 4 次。合計可以得到 16 小時的播放時間。 Power on: 開機 Method 1: Open the lid of charge box, both earbuds will turn on and connect with each other automatically.
Note: if your device can’t active the Siri function, please check whether you have set this function before. After you set them, forget our Bluetooth earbuds model PHR200 from your phone, turn off the Bluetooth of your device, and turn on your device again, search and click our model to pair again. 備註：如果你的設備無法啟動 SIRI 功能，請檢查以前是否設置過此功能。設置以後，在手機上忽略掉藍牙配對名 PHR200， 關掉藍牙功能再打開藍牙，搜索並選擇我們的型號重新配對。 Pairing 配對 1、Open the lid of charge box, both earbuds will turn on and connect with each other automatically.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
