Acer Projector U5220/R215/PU-X15/U5320W/R225/ PU-W15/U5520B/R245E/PU-815K/ U5520i/R245R/PU-815F Series User's Guide
Copyright © 2015. Acer Incorporated. All Rights Reserved. Acer Projector User's Guide Issue date: 01/2015 Changes may be made periodically to the information in this publication without obligation to notify any person of such revisions or changes. Such changes will be incorporated in new editions of this manual or supplementary documents and publications.
iii Information for Your Safety and Comfort Read these instructions carefully. Keep this document for future reference. Follow all warnings and instructions marked on the product. Turning the product off before cleaning Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
iv • • To avoid damage of internal components and to prevent battery leakage, do not place the product on a vibrating surface. Never use it under sporting, exercising, or any vibrating environment which will probably cause unexpected short current or damage rotor devices or lamp. Using electrical power • • • • • This product should be operated from the type of power indicated on the marking label. If you are not sure of the type of power available, consult your dealer or local power company.
v Product servicing Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage points or other risks. Refer all servicing to qualified service personnel.
vi • • • • • • • • • • • • • • • • • • might cause fire or electric shock. In this case, unplug immediately and contact your dealer. Do not keep using this product to break or drop it. In this case contact your dealer for inspection. Do not face the projector lens to the sun. It can lead to fire. When switching the projector off, please ensure the projector completes its cooling cycle before disconnecting power. Do not frequently turn off the main power abruptly or unplug the projector during operation.
vii Caution for Listening To protect your hearing, follow these instructions. • • • • • Increase the volume gradually until you can hear clearly and comfortably. Do not increase the volume level after your ears have adjusted. Do not listen to music at high volumes for extended periods. Do not increase the volume to block out noisy surroundings. Decrease the volume if you can't hear people speaking near you. Disposal instructions Do not throw this electronic device into the trash when discarding.
viii First Thing First Usage Notes Do: • Turn off the product before cleaning. • Use a soft cloth moistened with mild detergent to clean the display housing. • Disconnect the power plug from AC outlet if the product is not being used for a long period of time. Don't: • Block the slots and openings on the projector provided for ventilation. • Use abrasive cleaners, waxes or solvents to clean the unit. • Use under the following conditions: • • • • In extremely hot, cold or humid environments.
First Thing First iii viii Usage Notes viii Precautions viii Introduction 1 Product Features 1 Package Overview 2 Projector Overview 3 Projector Outlook 3 Control Panel 4 Remote Control Layout 5 MHL Feature Introduction 7 Getting Started Connecting the Projector Turning the Projector On/Off 8 8 12 Turning On the Projector 12 Turning Off the Projector 13 Adjusting the Projected Image 14 How to Optimize Image Size and Distance 14 How to Get a Preferred Image Size by Adjusting D
LED & Alarm Definition Listing 41 Using the Inner Connector(s) 41 Replacing the Lamp 42 Wall Mount Installation 44 Specifications 45 Compatibility Modes 48 Regulations and safety notices 52
1 Product Features This product is a single-chip DLP® projector, including the following outstanding features: THIS PROJECTOR CAN ONLY BE WALL MOUNTED. • • • • • • • • • • • • • • • • • DLP® technology U5220/R215/PU-X15: Native 1024 x 768 XGA resolution, Auto/4:3/16:9 aspect ratio supported U5320W/R225/PU-W15: Native 1280 x 800 WXGA resolution, Auto/Full/4:3/ 16:9/L.Box aspect ratio supported U5520B/R245E/PU-815K/U5520i/R245R/PU-815F: Native 1920 x 1080 1080p resolution, Auto/Full/4:3/16:9/L.
English 2 Package Overview This projector comes with all the items shown below. Check to make sure you have them all. Contact your dealer immediately if any thing is missing.
3 English Projector Overview Projector Outlook Front/upper side 2 3 4 5 6 1 7 8 9 10 # Description # Description5 1 Remote control receiver 6 Power key and Power indicator LED 2 Mirror 3 Projection lens 7 Lamp cover 4 Focus ring 8 Control panel 5 HDMI (MHL) connector 9 Remote control receiver Micro USB cable 10 PB dongle slot USB connector (Type A) (for selected models) Rear side 1 2 4 5 6 7 8 9 10 11 12 3 4 5 6 7 8 9 10 11 14 15 (U5220/R215/PU-X15/U5320W/R225/PUW15)
English 4 Control Panel 1 2 3 7 8 4 9 5 6 10 3 # Function Description 1 LAMP Lamp Indicator LED. 2 POWER indicator LED Refer to the "Turning the Projector On/Off" section. 3 Keystone Adjusts image distortion caused by tilting projection (±15 degrees). 4 Power key Refer to the "Turning the Projector On/Off" section. 5 MENU Launches the Onscreen Display (OSD) menu, returns to the previous step for the OSD menu operation or exits the OSD menu.
5 # 1 Function English Remote Control Layout Description POWER Refer to the "Turning the Projector On/Off" section. 2 MEDIA SETUP Opens MEDIA SETUP page. 3 ZOOM Zooms the projector display in or out. 4 MODE Chooses a display mode. 5 Keystone Four directional selection keys Adjusts image distortion caused by tilting projection (±15 degrees). Selects items or makes adjustments to your selection. 6 Keypad 0~9 Press "0~9" to input a password in the "Setting" > "Security" OSD.
English 6 # Function Description 15 MENU Launches the Onscreen Display (OSD) menu, returns to the previous step for the OSD menu operation or exits the OSD menu. 16 PgUp/PgDn For computer mode only. Use this button to select the next or previous page. This function is only available when connected to a computer via a USB cable. 17 VIDEO To change source to composite video. 18 RATIO Chooses an aspect ratio.
7 When your smartphone is connected to the projector, you can use some buttons on the remote control to control your smartphone. Press "MODE" for one second to enter or leave the MHL control mode. After entering the MHL control mode, press "SOURCE" to switch between the navigation mode (default), media mode and numeric mode. Description # Function Navigation mode Media mode Numeric mode 4 MODE Long press for one second to enter or leave the MHL control mode.
English 8 Getting Started Connecting the Projector • For models without multi-media function VGA Display DVD player, Set-top box, HDTV receiver 11 Video/S-Video Output Smartphone /tablet L R RS232 R B G 9 11 R B G 3 D-Sub HDTV adapter L R Microphone Speakers 13 # Description # Description 1 Power cord 8 USB cable 2 VGA cable 9 3 RCA component cable 3 VGA to component video/HDTV adapter 10 HDMI (MHL) cable 4 Composite video cable 11 RJ45 cable 5 Audio cable 12 WirelessHD
9 Description 6 S-Video cable 7 RS232 cable # Description 13 Wireless dongle Note: To ensure the projector works well with your computer, please make sure the timing of the display mode is compatible with the projector. Note: Some smart devices require a converter (supplied by the smart device maker) to enable the MHL function. Note: Compatible HDMI/MHL dongles: WirelessHD, MWA3, Android, ChromecastTM.
English 10 • For models with multi-media function VGA DVD player, Set-top box, HDTV receiver Display 11 Video/S-Video Output L R Smartphone /tablet RS232 R B G 9 11 R B G 3 13 D-Sub HDTV adapter L R Microphone Speakers 13 14 12 # Description # Description 1 Power cord 9 3 RCA component cable 2 VGA cable 10 HDMI (MHL) cable 3 VGA to component video/HDTV adapter 11 RJ45 cable 4 Composite video cable 12 WirelessHD dongle 5 Audio cable 13 Wireless dongle
11 6 Description S-Video cable 7 RS232 cable 8 USB cable # Description 14* USB storage device/USB Wifi adapter (Optional) Note: To ensure the projector works well with your computer, please make sure the timing of the display mode is compatible with the projector. Note: Some smart devices require a converter (supplied by the smart device maker) to enable the MHL function. Note: Compatible HDMI/MHL dongles: WirelessHD, MWA3, Android, ChromecastTM.
English 12 Turning the Projector On/Off Turning On the Projector 1 Ensure that the power cord and signal cable are securely connected. The Power LED will light red. 2 Turn on the projector by pressing (POWER) on the control panel or remote control, and the Power indicator LED will turn blue. 3 Turn on your source (computer, notebook, video player, etc.). The projector will detect your source automatically (when the Source Lock function is disabled).
13 1 To turn the projector off, press the power button. This message appears: "Please press power button again to complete the shutdown process" Press the power button again. 2 The LED Power indicator will turn solid red to indicate standby mode. 3 It is now safe to unplug the power cord.
English 14 Adjusting the Projected Image How to Optimize Image Size and Distance Consult the table below to find the optimal image sizes achievable when the projector is positioned at a desired distance from the screen. • SVGA/XGA If the projector is 70 cm from the screen, good image quality is possible for image sizes around 78.2". Note: Remind as below figure, the space of 151 cm height is required when the projector is located at 70 cm distance. A 70 cm Desired distance C 78.
15 WXGA If the projector is 70 cm from the screen, good image quality is possible for image sizes around 92.2". Note: Remind as below figure, the space of 153 cm height is required when the projector is located at 70 cm distance. 70 cm Desired distance A C 92.2" B Screen Size (Min zoom) Desired From base to Distance Diagonal bottom of (cm) (inch) W (cm) x H (cm) image (cm) 45 61.2 132 x 82 50 67.4 145 x 91 102 112 60 79.8 172 x 107 133 70 92.2 199 x 124 153 80 104.
English 16 • 1080P If the projector is 70 cm from the screen, good image quality is possible for image sizes around 94.2". Note: Remind as below figure, the space of 150 cm height is required when the projector is located at 70 cm distance. 70 cm Desired distance A C 94.2" B Screen Size (Min zoom) Desired From base to Distance Diagonal bottom of (cm) (inch) W (cm) x H (cm) image (cm) 55 75.1 166 x 94 60 81.5 180 x 101 120 130 70 94.2 208 x 117 150 80 106.
17 The table below shows how to achieve a desired image size by adjusting either the position or the zoom ring. • SVGA/XGA To obtain an image size of 90", set the projector at a distance 0.9 m from the screen. 0.9 m Desired distance B&C 90" Desired image size A Desired Image Size Diagonal (inch) W (cm) x H (cm) Distance (m) Max zoom Min zoom Height: 174 cm From base to bottom of image D Top (cm) From base to bottom of image < D > 60 122 x 91 0.53 0.53 116 70 142 x 107 0.
English 18 • WXGA To obtain an image size of 90", set the projector at a distance 0.7 m from the screen. 0.7 m B&C Desired distance Height: 150 cm From base to bottom of image D A 90" Desired image size Desired Image Size Diagonal (inch) Distance (m) Top (cm) W (cm) x H (cm) Max zoom Min zoom From base to bottom of image < D > 60 129 x 81 0.44 0.44 100 70 151 x 94 0.52 0.52 116 80 172 x 108 0.60 0.60 133 90 194 x 121 0.68 0.68 150 100 215 x 135 0.76 0.
19 1080P To obtain an image size of 90", set the projector at a distance 0.7 m from the screen. 0.7 m B&C Desired distance D 90" Desired image size Desired Image Size Diagonal (inch) W (cm) x H (cm) A Distance (m) Max zoom Min zoom Top (cm) From base to bottom of image < D > 70 155 x 87 0.51 0.51 112 80 177 x 100 0.59 0.59 128 90 199 x 112 0.67 0.67 143 100 221 x 125 0.75 0.75 159 110 244 x 137 0.82 0.82 175 120 266 x 149 0.90 0.90 191 Zoom Ratio: 1.
English 20 User Controls Installation Menu The Installation menu provides an Onscreen Display (OSD) for projector installation and maintenance. Use the OSD only when the message "No signal" is displayed on the screen. 1 Turn on the projector by pressing remote control. (POWER) on the control panel or 2 Press "MENU" on the control panel or remote control to launch the OSD for projector installation and maintenance.
21 The projector has multilingual Onscreen Display (OSD) menus that allow you to make image adjustments and change a variety of settings. Using the OSD menus • To open the OSD menu, press "MENU" on the control panel or remote control. • When the OSD is displayed, use to select an item in the main menu. After selecting the desired main menu item, press for feature setting. • Use to enter a submenu to select the desired item and adjust the settings by using .
English 22 Color There are many factory presets optimized for various types of images. Display Mode Wall Color • Bright: For brightness optimization. • Presentation: For meeting presentation with higher brightness. • Standard: For common environment. • Video: For playing video in a bright environment. • Education: For education environment. • User: Memorize user’s settings. Use this function to choose a proper color according to the wall.
23 Gamma Effects the representation of dark scenery. With greater gamma value, dark scenery will look brighter. Note: "Saturation" and "Tint" functions are not supported under computer , or HDMI (PC) mode. English Dynamic Black If turned on, the projector dynamically adjusts the power consumption of the lamp according to the brightness of the image being projected. When projecting darker images the power consumption will be reduced and the contrast of the image will also be enhanced.
English 24 Image Projection • : When you select this function, the projector inverts the image for wall-mounted projection. • : When you select this function, the projector reverses and inverts the image at same time. You can project from behind a translucent screen with wall mounted projection. Use this function to choose your desired aspect ratio. • Auto: Keeps the image with original width-height ratio and maximizes the image to fit native horizontal or vertical pixels.
25 4 Corner Correction Adjusts the sharpness of the image. Sharpness • Press to decrease the sharpness. • Press to increase the sharpness. H. Position (Horizontal Position) • Press to move the image left. • Press to move the image right. V. Position (Vertical Position) • Press to move the image down. • Press to move the image up. Frequency Changes the projector’s refresh rate to match the frequency of your computer’s graphics card.
English 26 Note: "H. Position", "V. Position", "Frequency" and "Tracking" functions are not supported under video mode. Note: "HDMI Color Range" and "HDMI Scan Info" are only available when the input signal is HDMI.
27 The Acer SmartPen can work in place of your regular computer mouse. Just hold the pen in your hand, and point it at the projected image to point, click, and drag. It gives you more flexibility to operate your computer without standing next to it. Pen Function • To use the Acer SmartPen, select "On" to activate this function. Link Channel • SmartPen Set a channel to differentiate between projectors and communicate with the Acer SmartPen.
28 English Use this function to customize the startup screen. To capture the image that you want to use as the startup screen, follow the instructions below. Notice Before proceeding with the following steps, make sure that the "Keystone" is set to the default value "0", and the "Aspect Ratio" is set to "4:3". For details, refer to the "Image" section. Screen Capture • Change the "Startup Screen" from the default setting "Acer" to "User". • Select "Screen Capture" to customize the startup screen.
29 Press after choosing "Yes" to return the display parameters on all menus to the factory default settings. Security This projector provides a useful security function for the administrator to manage the projector. Press to change the "Security" setting. If the security function is enabled, your must enter "Administrator Password" first before changing the security setting. The factory default of "Administrator Password" is "1234". Security • Select "On" to enable the security function.
30 English User Password Security • Press • Use the numerical keys on the remote control to set the password and press "MENU" to confirm. • To delete the digits, Press • Enter the password again when you see "Confirm Password" displayed. • The password should be 4~8 digits in length. • If you select "Request password only after plugging power cord", you are requested to input the password every time the power cord is plugged.
31 Press after choosing "Yes" to return all items on the Tools page to the default settings. About LAN Setting Note 1 : An overview of the remote network operation page See Note 2 and Note 3. To switch input signals, click your desired signal. These buttons function the same as those on the OSD menus, projector control panel, or remote control. Note 2 : An overview of the Tools page You can enter the projector information. You can adjust the LAN control settings.
English 32 Note 3: The Info page shows the projector information and status. About Acer SmartPen Setting Note 1: Preparations 1. Connect the projector and your computer with a USB cable and VGA cable. 2. Turn on your projector and make sure it is displaying the computer’s image. 3. Plug the PB dongle to the PB dongle slot on the side of the projector. 4. Enable the pen by selecting "On" in the Setting > SmartPen > Pen Function menu. The pen’s link light starts to blink. 5.
33 Nib Left mouse button Right mouse button Information key Link light USB connector Power switch Note 3: Charging the battery 1. To charge the battery, open the flap on the back of the pen to expose the USB connector. 2. Take a USB cable, and connect the smaller end to the pen and the larger end to a computer. Make sure the computer is powered on. 3. The battery light stays on while the battery is charging. When charging is finished, the battery light is off.
English 34 Management ECO Mode Choose "On" to dim the projector lamp, which will also lower the power consumption, reduce noise, and extend the lamp life. Choose "Off" to return to the normal mode. High Altitude Choose "On" to turn on the High Altitude mode. When this function is turned on, the projector fans operate at full speed continuously to cool down the projector’s temperature.
35 Selects "On" to enable the 3D function supported by DLP 3D technology. 3D • On: Select this item while using DLP 3D glasses, quad buffer (NVIDIA/ATI...) graphics card and HQFS format file or DVD with corresponding SW player. • Off: Turns off the 3D mode. 3D Format If the 3D content is not displayed correctly, you can select a 3D format that suits the 3D content you are viewing and obtain the best result. 24P 3D Choose 96Hz or 144Hz for 24p 3D.
36 English The SW players, such as Stereoscopic Player and DDD TriDef Media Player can support 3D format files. You can download these players on the web page below. - Stereoscopic Player (Trial): http://www.3dtv.at/Downloads/Index_en.aspx - DDD TriDef Media Player (Trial): http://www.tridef.com/download/TriDef3-D-Experience-4.0.2.html Note: "3D Sync Invert" and "3D Format" are only available when "3D" is enabled. Language Language Sets a language for the OSD menus. Use select your preferred language.
37 English Appendices Troubleshooting If you experience a problem with your Acer projector, refer to the following troubleshooting guide. If the problem persists, please contact your local reseller or service center. Image Problems and Solutions # 1 2 Problem No image appears onscreen Partial, scrolling or incorrectly displayed image (For PC (Windows 95/98/2000/XP/ Win7/Vista)) Solution • Make sure all the cables are correctly connected as described in the "Getting Started" section.
English 38 3 4 5 6 7 Partial, scrolling or incorrectly displayed image (For notebooks) The screen of the notebook computer is not displaying your presentation Image is unstable or flickering Image has vertical flickering bar Image is out of focus • Press "SOURCE" on the control panel or remote control. • For an incorrectly displayed image: • Follow the steps for item 2 (above) to adjust the resolution of your computer. • Press the toggle output settings.
39 9 10 11 Image is stretched when displaying a "widescreen" DVD title Image is too small or too large Image has slanted sides Image is reversed When you play a DVD encoded in anamorphic or 16:9 aspect ratio you may need to adjust the following settings: • If you play a 4:3 format DVD title, please change the format to 4:3 with the projector OSD. • If the image is still stretched, you will also need to adjust the aspect ratio.
English 40 OSD Messages # 1 Condition Message Message Reminder Fan Fail - the system fan is not working. Fan Fail. Lamp will automatically turn off soon. Projector Overheated - the projector has exceeded its recommended operating temperature and must be allowed to cool down before it is used. Please also check the dust filters if they are installed. If the dust filter is clogged with dust, please clean it. Projector Overheated. Lamp will automatically turn off soon.
41 English LED & Alarm Definition Listing LED Messages Message Power LED LAMP LED TEMP LED Red Blue Red Red Standby (Power cord plugged in) V -- -- -- Power on -- V -- -- Lamp retry -- Quick flashing -- -- Turning off (Cooling state) Quick flashing -- -- -- Turning off (Cooling completed) V -- -- -- Error (Thermal failure) -- V -- V Error (Fan lock failure) -- V -- Quick flashing Error (Lamp breakdown) -- V V -- Error (Color wheel failure) -- V Quick flas
English 42 6 Replace the cover and tighten the screw(s). (Illustration #4 - #5) 5 3 2 4 1 5 Replacing the Lamp Use a screwdriver to remove the screw(s) from the cover, and then pull out the lamp. The projector will detect the lamp life itself. It will show you a warning message "Lamp is approaching the end of its useful life in full power operation. Replacement Suggested!" When you see this message, change the lamp as soon as possible.
43 Push up and remove the cover. 3 Remove the lamp protection film (Illustration #2). 4 Remove the screw that secures the lamp module (Illustration #3). 5 Disconnect the lamp connector from the projector. Lift the handle so that it stands up. Pull out the lamp module by force (Illustration #4). To replace the lamp module, use a new lamp and reverse the above steps (Illustrations # 5 - # 8 ). Warning: To reduce the risk of personal injury, do not drop the lamp module or touch the lamp bulb.
Wall Mount Installation For details, refer to the user manual enclosed with the wall mount kit (SWM04). Warning: Ensure that only qualified service personnel install the projector. 287.3 58.5 188.32 65.5 149.5 M4x8 288 242.04 125.96 238.12 English 44 338.99 322.
45 The specifications below are subject to change without notice. For final specs, please refer to Acer's marketing documentation.
English 46 Horizontal scan rate 31 - 99 KHz Vertical refresh scan rate 23 - 120 Hz Keystone correction +/-15 Degrees (Horizontal & Vertical), Manual Digital zoom 2X Audio 10W x 2 Weight Approximate 5.5kg (12.13 lbs.) Dimensions (W x D x H) 339 x 322.8 x 236.
47 Standard package contents Accessory (optional) • • • • • • • • • • • • • • • Power socket x 1 • • • • • • • • AC power cord x 1 • • • • • • • • Composite video cable x 1 Mini USB x 1 USB Type A x 2 VGA input x 2 VGA output x 1 Composite video x 1 S-Video x 1 HDMI (MHL) x 2 RS232 x 1 3.5 mm audio jack input x 2 3.
English 48 Compatibility Modes 1 VGA Analog - PC Signal Mode VGA SVGA XGA Resolution 640 x 480 800 x 600 1024 x 768 1152 x 864 SXGA 1280 x 1024 QuadVGA 1280 x 960 V.Frequency [Hz] H.Frequency [KHz] 60 31.47 72 37.86 75 37.50 85 43.27 120 61.91 56 35.20 60 37.88 72 48.08 75 46.88 85 53.67 120 77.43 60 48.36 70 56.48 75 60.02 85 68.68 120 98.96 70 63.85 75 67.50 85 77.10 60 63.98 72 76.97 75 79.98 85 91.15 60 60.00 1280 x 960 75 75.
49 60 47.78 1280 x 768 75 60.29 1280 x 768 85 68.63 1280 x 720 60 45.00 1280 x 800 60 49.70 1280 x 800 - RB 120 101.6 1440 x 900 60 55.94 1680 x 1050 60 65.29 47.71 WXGA 2 1366 x 768 60 1920 x 1080-RB 60 66.60 1920 x 1080-EIA 60 67.50 1024 x 600 60 37.50 1920 x 1200-RB 59.95 74.04 HDMI - PC Signal V.Frequency [Hz] H.Frequency [KHz] VGA_60 59.94 31.469 VGA_72 72.809 37.861 Mode VGA_75 Resolution 75 37.5 VGA_85 85.008 43.269 VGA_120 119.518 61.
50 English SXGA+_60 1400 x 1050 59.978 UXGA_60 1600 x 1200 60 75 Mac G4 640 x 480@60Hz 59.94 31.469 MAC13 640 x 480@67Hz 66.667 35 Mac G4 800 x 600@60Hz 60.317 37.879 Mac G4 1024 x 768@60Hz 60.004 48.363 MAC19 1024 x 768@75Hz 75.02 60.241 MAC21 1152 x 870@75Hz 75.061 68.681 59.87 47.776 1280 x 768 74.893 60.289 84.837 68.633 WXGA_60 WXGA_75 WXGA_85 3 65.317 WXGA_60 1280 x 720 60 45 WXGA_60 1280 x 800 59.81 49.702 WXGA_120-RB 1280 x 800 119.909 101.
51 MHL - Video Signal Mode Resolution 720 x 480 (1440 x 480) V.Frequency [Hz] H.Frequency [KHz] 60 15.73 480p 720 x 480 60 31.47 576i 720 x 576 (1440 x 576) 50 15.63 480i 5 576p 720 x 576 50 31.25 720p 1280 x 720 60 45.00 720p 1280 x 720 50 37.50 1080i 1920 x 1080 60 33.75 1080i 1920 x 1080 50 28.13 1080p 1920 x 1080 24 27.00 1080p 1920 x 1080 23.98 26.97 1080p 1920 x 1080 30 33.
English 52 Regulations and safety notices FCC notice This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Cet appareil numérique de la classe B est conforme a la norme NMB-003 du Canada. Declaration of Conformity for EU countries Acer hereby, declares that this projector series is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Compliant with Russian regulatory certification Radio device regulatory notice Note: The regulatory information below is for models with wireless LAN and/or Bluetooth only.
English 54 List of applicable countries This device must be used in strict accordance with the regulations and constraints in the country of use. For further information, please contact a local office in the country of use. Please see http://ec.europa.eu/enterprise/rtte/implem.htm for the latest country list.
Declaration of Conformity We, Acer Incorporated 8F, 88, Sec. 1, Xintai 5th Rd., Xizhi, New Taipei City 221, Taiwan Contact Person: Mr. RU Jan, e-mail:ru_jan@acer.com.tw And, Acer Italy s.r.l Via Lepetit, 40, 20020 Lainate (MI) Italy Tel: +39-02-939-921, Fax: +39-02 9399-2913 www.acer.
English 56 Acer America Corporation 333 West San Carlos St., Suite 1500 San Jose, CA 95110 U. S. A. Tel: 254-298-4000 Fax: 254-298-4147 www.acer.com Federal Communications Commission Declaration of Conformity This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
