Operation Manual

32
English
Note 3: The Info page shows the projector information and status.
About Acer SmartPen Setting
Note 1: Preparations
1. Connect the projector and your computer with a USB cable and VGA cable.
2. Turn on your projector and make sure it is displaying the computer’s
image.
3. Plug the PB dongle to the PB dongle slot on the side of the projector.
4. Enable the pen by selecting "On" in the Setting > SmartPen > Pen Function
menu. The pen’s link light starts to blink.
5. Point the pen at the screen to point, click, and drag.