Pocket PC Phone User Guide
SAR Information Read this manual carefully before using. Warning: Reduced electromagnetic waves. Please use properly. For CE/ NCC Head Max SAR 900 1800 2100 W/kg @10g W/kg @10g W/kg @10g Safety Instructions U Please read before proceeding. U Avoid applying excessive pressure to the touch screen, especially when using the stylus or your fingers. U In case the Pocket PC is damaged, send it back to the dealer for repair.
User Guide Safety Instructions .............................................................................. 2 1 Getting Started / .................................................................... 1-1 Package Contents ............................................................................. 1-1 External Views ................................................................................. 1-2 QWERTY Keyboard......................................................................
Location SMS .................................................................................. 2-7 GPS Viewer...................................................................................... 2-9 3 Using the Phone /................................................................... 3-1 Using the Headset ............................................................................ 3-2 Using the Phone for the First Time .................................................. 3-3 Adjusting the Phone Volume....
1 Getting Started / Package Contents Pocket PC Stylus Battery Getting Started CD User Guide Headset AC adapter USB cable n o q p r t n Pocket PC o Stylus r User Guide s USB cable s p Battery t AC adapter q Getting Started CD Getting Started 1-1
External Views 1-2
1. Mini USB connector/headset 2. Jog dial connector 3. MicroSD slot 4. Video conference camera 5. Light sensor 6. BT/WLAN/GPS LED indicator 7. Phone receiver 8. Power/phone LED indicator 9. Display, touch screen 10. Send/Talk key 11. End key 12. Hot key reserved for GPS AP 13. Home hot key 14. Fingerprint reader 15. Microphone 16. Stylus 17. Power key 18. Record key/Voice Commander hot key 19. Reset key 20. Camera hot key 21. Speaker 22. Camera lens 23. Flashlight LED 24.
QWERTY Keyboard Close Open 1-4
Hardware Hotkey Functions p q n Hardware Press button n o o Press and hold Launch Phone/dial/redial/answer Put current call on hold End a call Turn off phone if it is on Disconnect GPRS Turn on phone if it is off Return to the Today screen while in other programs p Power key = Turn the Pocket PC on/off Turn the screen on/off q p+q Reset key -- Power key + Reset key = -- Cold boot Getting Started 1-5
Using the Pocket PC for the First Time If you are opening this product for the first time, the main battery and the Pocket PC are packed separately inside the product packaging. Installing and Removing the SIM Card 1. Before installing the SIM card, launch Communication Manager, and then tap the OFF button in Flight Mode. This indicates that the wireless connection of the Pocket PC is disabled. 2. Press the Pocket PC Power key to turn off the screen. 3.
4. To Install the SIM card Turn over your Pocket PC and remove the battery cover. Please pay attention to the direction of the missing corner of the SIM card, and then insert the SIM card into the slot.
5. To Install the battery Place the battery in the back of Pocket PC. Make sure that the golden contacts are aligned to the battery box; gently insert the battery until it clicks. Then replace the battery cover.
Charging Power and Power Supply n Connect the AC adapter plug to any household power outlet. o Connect the other plug from the AC adapter to the USB port. The Pocket PC will start charging automatically. p If you need to connect your Pocket PC to a computer, connect the USB cable to the USB port. Then connect the other end of the USB cable to the USB port on the computer. Your Pocket PC will also be charged while connected. But don’t remove the battery while charging.
1. It will take about eight hours to fully charge the battery the first time. Subsequent charging will only take about three hours. After charging, you can disconnect the AC adapter to take your Pocket PC with you. To ensure smooth operation, charge the battery regularly. 2. The battery icon in the upper right corner of the screen indicates remaining battery charge. 3. The LED indicator on the right of the Pocket PC indicates the charging and function status. Red: Device is charging.
Re-installing or Replacing the Battery If the phone, GPRS or wireless LAN connection are already activated, deactivate them first and then replace the battery. Turn over your Pocket PC and remove the battery cover. Place the battery in the back of Pocket PC. Make sure that the golden contacts are aligned to the battery box; gently insert the battery until it clicks. Then replace the battery cover.
Fingerprint Reader Swipe your enrolled finger on the fingerprint sensor. Tap , Settings, the Personal tab and then mEgis (Fingerprint) to set the details.
Power On and Off Power key Power Off Mode 1. Press and hold the Power key on the Pocket PC and then tap Yes to turn off the Pocket PC. All functions will be disabled; this is not the same as Sleep mode. 2. To turn on, simply press the Power key. Using the Stylus to Touch the Screen Your Pocket PC is designed for graphics-based operation. Generally speaking, we usually “use the stylus to perform basic actions such as tap, drag, and tap and hold” on the touch screen.
Sleep Mode 1. Press the Power key of the Pocket PC to enter the Sleep mode. At this time, the screen is turned off and all peripheral devices enter the power-saving mode. But if the phone is turned on, it is still in the call waiting mode. 2. To turn on the screen later, just press the Power key. 3. Tap , Settings, the System tab, Power and then the Advanced tab to set the device to turn off automatically after waiting for a certain time period.
Turn on the Screen This product is designed with a power-saving feature. If the screen is turned off, press the Power key of the Pocket PC to turn it on. If the screen is too dark and you cannot see clearly, set the proper brightness level for the backlight. Tap , Settings, the System tab, Backlight and then the Backlight Level tab.
Restarting the Pocket PC You should restart your Pocket PC if it is unable to maintain normal operation, does not response or if the screen is frozen. You have four choices: 1. Reset Resets the Pocket PC and retains all your data and custom settings. 2. Default Settings procedures Use this when the touch screen is functional. It will restore Windows Mobile and factory-installed programs. You will lose all your data and custom settings. 3.
Reset V To reset your Pocket PC: Press the Reset key using the stylus tip. V Appropriate situation: You should restart your Pocket PC if it is unable to maintain normal operation, does not response or if the screen is frozen. V Result: The Pocket PC will boot to the Today screen. This will retain Microsoft Windows Mobile, factory-installed applications, your data, other installed programs and custom settings.
Default Settings To restore the default settings: Tap , Programs, Utilities, and then Default Settings. 1. If this application is inadvertently accessed, please select the to exit, the system will not be affected. 2. If you are certain that you wish to perform this action, please select the text box on the right, and enter the authorization code in the block on the left. Then tap OK. V Appropriate situation: If the Pocket PC is unable to maintain normal operation, but the touch screen is functional.
Cold Boot V To cold boot your Pocket PC: Hold the Power key with one hand while using stylus tip to push in the Reset key with the other. Simultaneously release both the Power key and Reset key. V Appropriate situation: Only do this if you have already tried to reset using another method, and your Pocket PC is still not operating normally, is not responding or the screen is frozen.
Clean Boot V Appropriate situation: If you have tried the previous methods, and they have not solved the problem, then you may clean boot your Pocket PC. V Result: This will reinstall Microsoft Windows Mobile and factory-installed applications. Other settings such as your own data, installed programs and other custom settings will be erased. 1. Press and hold both Power key and Reset key for a while, then release them simultaneously. 2.
The operation “Erase all data and load default?” will delete all the data you stored on your device and restore it back to factory default settings. If you press Camera hot key upon seeing the line “Yes [press CAMERA button]” at the bottom of screen, all the data you stored, programs you installed and customized settings you made on your Pocket PC will be cleared. Follow the onscreen instructions to complete the resetting after the Pocket PC reboots.
1-22
2 Voice Command Satellite Navigation / Navigation Device Installation n o n Pocket PC o Car Charger (* optional): when Pocket PC is low on power, recharge by connecting one end to the car cigarette lighter/12 volt power outlet and the other end to the socket on Pocket PC. Attention: The GPS signal receiver is built into the Pocket PC. If car windscreen has heat reflective metallic film, or Pocket PC is obstructed by objects, then the receptivity of the GPS will be adversely affected.
GPS Navigation Software Installation Please follow your car navigation system operating manual’s instructions on software installation in order to use the navigation function. Conditions for Using GPS Car Navigation By using this system you are agreeing to the following conditions: 1. When using this device, please use with matching car mount. Affix device securely to the car mount. Please be aware that installation in the areas depicted below is forbidden and is strictly prohibited.
2. Please set navigation destination before driving. Do not operate this system while driving. 3. Please use this system with care. If any harm results from careless use of this system, the responsibility for safe driving resides with the driver. 4. GPS positioning is limited by weather and usage location (tall buildings, tunnels, underpasses, trees, bridges). Most GPS do not work indoors, nor can GPS signals penetrate buildings, car sun shades and heat reflective film with metallic content.
Satellite Data Update (Not supported in USA) Tap , Programs, GPS, and then Satellite Data Update. Login to the provider’s server to download instant satellite data and enable the GPS function. Note: either of the following connections allows your Pocket PC to download the latest GPS data. If there is more than one connection available, the system will automatically select the best connection, in the following order: 1. Synchronization connection: Connect your Pocket PC to a PC (Desktop or Notebook).
Á Tap the Download Button to update the GPS data manually. The figure on the left shows how to download using the synchronization connection. ÁTap the Setting Button in the Satellite Data Update main screen to open the dialog in the left n o figure. n Check the expiration checkbox to activate the reminder function on the due date. o The default value is checked. The system will automatically update the data when online.
After setting your Pocket PC to the following connection mode and activating the automatic update and Internet connection functions, the system will automatically download the latest GPS information periodically. 1. Synchronization connection. Make sure that your Pocket PC is connected to the PC, and that the PC is online. 2. Wireless LAN connection. 3. GPRS connection. Á When the GPS data has expired, n the relevant message displays on the top of the screen.
Location SMS Tap , Programs, GPS, and then Location SMS. You can utilize the GPS function offered by your Pocket PC, to send the matching location automatically found by this program and the necessary message to your contacts. This could be helpful in preventing kidnapping, reporting disastrous situations, calling for help in emergencies or locating an individual. In addition, we have formulated many SMS templates based on different situations for your convenience. n o p [ \ 1.
2. Select in the main screen, once in the screen shown on the left, tap on any message and tap OK to select. Further, by pressing and holding anywhere on the screen, together with the pop-up menu, you can add, edit or delete your most used messages. 3. The content of the message that your recipient views looks similar to what is shown on the left. Actual messages differ depending on the recipient’s device.
GPS Viewer Tap , Programs, GPS, and then GPS Viewer. You may use this Pocket PC to automatically search the GPS coordinates of your location and check if the GPS functions work properly. n o p [ n o p q 1. Run this program in a location with good signal reception. n Greenwich Mean Time (GMT): After connecting to a satellite and obtaining the GMT, it will be displayed on the screen. Tap to set the satellite time as the system time. o Report GPS tracking information. p Tap to change the unit.
2-10
3 Using the Phone / The Phone feature on the Pocket PC allows you to perform the following tasks: V Make and receive calls. V Quickly make calls or listen to voice mail without entering phone numbers using Contacts, Speed Dial, or your Call Log. V Check the Call Log to see who has called, whom you have called, add a new number to Contacts, and access notes taken while you were on a call. V Receive calls and easily take notes during the call. V Send SMS messages. V Customize how your phone rings.
Using the Headset p n o q nMicrophone pPhone receiver oEarphone qMicrophone (Bottom of Pocket PC) Combination Operation Method Hold the Hold the Pocket Pocket PC PC and position manually the receiver for calls close to your ear and the microphone close to your lips. Install the Place the external earphone in headset your ear and position the microphone to your lips. 3-2 Answer or End a Call Press or on the lower part of the Pocket PC.
Using the Phone for the First Time 1. Turn on the phone n On the Today screen, tap to launch Communication Manager. o Or tap the icon. When the message window appears, tap “Comm. Manager.” to enable Phone. p Tap q Input the PIN and wait for the phone to turn on. r changes to And the . icon changes to 2. Dial: Press . to enter the Phone screen. Use the stylus to tap the telephone number and then tap the Talk Button. 3. Answer a call: Press 4. End a call: Press . . 5.
Adjusting the Phone Volume on the top and adjust all Tap programs’ sound functions under . Adjust the phone sound volume under . 1. When there is no call, you can push the volume control key on the side of the Pocket PC or use the stylus to tap the speaker icon Tap and then to adjust the ring volume of the incoming call. 2. Push the volume control key on the side of the Pocket PC or tap and then to adjust the phone volume. You can only do this during a call. 3.
Here is how to adjust the proper volume: 1. If earphones are used with the Pocket PC to make calls, set the volume according to actual personal needs. 2. If earphones are not used with the Pocket PC and not held close to the ear for calls but similar to hands-free operation, it is recommended to set the sound volume for the top two levels. 3. For holding the Pocket PC close to the ear directly for calls, it is recommended that you set the volume to the lower four levels.
Toolbar n Smart Dialing: Enter the portion n o p q r s 3-6 you remember and the system will use the fuzzy comparison method to list the matching contacts at area o on the figure. Please refer to the keyboard shown on the screen to enter information including the phone number and letters. o Tap a contact to view contents. p Provides the relevant menu. For example, select Options to change the phone setup such as ring tone, vibration mode, PIN code, etc. Or select Send Text Message to send SMS message.
The following table shows the icons that you may see on the Navigation Bar on the top of the screen. Signal Indicator Description SIM card unavailable. The phone is turned off. To turn it on, tap this icon. Network is searching or unavailable. Phone connection unavailable or network error. To turn it off, tap this icon. The phone is turned on and signal reception is normal. To turn it off, tap this icon. Active call. To switch back from other programs, tap this icon.
SMS Sender Tap , Messaging, Messages, Menu, New, and then Text Message. Press to bring up the Phone screen. Tap Menu and then Send Text Message. Enter the composing SMS screen in Messaging. n “Text Messages” means you are n editing SMS. o p o Input the mobile phone number. p Input the messages you want to send. q q Tap Menu and then My Text to select canned messages or to edit your Text Messages. r Tap to send SMS message.
4 Connections / Using Bluetooth Bluetooth is a short-distance wireless communication technology with an effective range under 10 meters (30 feet). When you enable Bluetooth function, the blue LED blinks once every 4 seconds. Bluetooth LED indicator (Blue) to launch 1.Tap Communication Manager. to 2.Tap enable Bluetooth. Bluetooth capable devices such as the PC, Pocket PC, Bluetooth headset etc. can be connected to this product for the convenience of data sharing.
Setup the Bluetooth Connection On the Communication Manager screen, tap and hold the , then release to enter the Bluetooth manager. Tap , Settings, the Connections tab, and then Bluetooth. Tap Bluetooth and then Devices tab. 1. Select “Add new device” and the system will begin to search for nearby Bluetooth devices. 2. The search results will be similar to the screen to the left. Select the device to connect with the list. n n All Bluetooth devices found o nearby the system.
Pair for Bluetooth headset: When the system asks for the password, please refer to the instructions provided with your purchased Bluetooth headset. Pair for PC or Pocket PC: When the system asks for the password, please make sure that the identical password is entered to both devices. 3. Your Pocket PC connected with these devices will be able to transfer data, receive calls on a n Bluetooth headset, and other applications. o n Successfully connected devices will be shown as on the screen to the left.
Tap Bluetooth and then Mode tab. 5. Configure the Bluetooth related options for your Pocket PC. Tap , Settings, the Personal tab, and then Owner Information. Enter the name that you wish to show in the Name field. At the same time, other Bluetooth capable devices can recognize your Pocket PC by this name.
5 Using Wireless LAN / This section teaches you how to use the Pocket PC’s built-in wireless LAN function to connect to the Internet. It is convenient for you to browse websites and send/receive E-mails through wireless networks at certain locations where wireless networking services are provided. When you purchase credits for connecting to the Internet through a wireless LAN, you will be given the following information: an IP address, DNS name server address, Proxy server, port, and network key, etc.
Connecting to Wireless LAN On the Today screen, tap Tap to launch Communication Manager. , Programs and then Communication Manager. n o p 5-2 n This icon will show up on your screen whenever your Pocket PC has detected a usable wireless network and has connected to that network, indicating that your Pocket PC has successfully connected to the network hotspot (Access Point). The LED indicator on the Pocket PC will blink amber.
Configure Your Wireless Network WLAN Setup Scenarios Location Home Office Select Networks Proxy Connection , Settings, the 1. Close Proxy connection Connections tab, Connections, the 2. Not required to set Proxy Advanced tab, Select Networks Button, and then select My Work Network from “Programs that automatically connect to the Internet should connect using:” menu Refer to the above and set as My Work Network Network key or Access Point 1. Authentication: Select Open 2.
Configure Your Wireless Network (Reference for a normal network setup) You will need a correct IP address, DNS name server address, Proxy server, and connection port number to setup your connection. If you have purchased a wireless Internet service account, then the service desk at the location where you will be connecting will provide you with this information, or, you should obtain this information from the network administrator of your company.
2. Then tap , Settings, the Connections tab, Connections, and then the Advanced tab, the screen displays shown on the left. 3. Select the Select Networks Button. 4. As shown on the left, make sure that My Work Network is selected for both items, and finally tap to save and exit. My Work Network is the WLAN connection method. As this option is from a choice of two, the next time you need to use the GPRS connection, you will have to refer to the above listed steps, select My ISP for the first item.
5. At the Communication Manager screen, tap and hold, and then release the to enter the setup screen. 6. Select name of a currently available network to enter the WLAN authorization setup screen. 7. Set accordingly to the rules and information provided by the hotspot location. n Authentication: Select Open o Data Encryption: Select WEP to enable the entry bar about Network key p Network key q Network index 8.
Configure Your Wireless Network (Reference for Proxy setup) To successfully configure your network, you will need the following information: a correct IP address, DNS name server address, Proxy server, and connection port number, etc. Please obtain the above listed information from your company’s network administrator. If your company’s networking environment doesn’t need Proxy server settings, please close the proxy connection. Tap , Settings, the Connections tab, Connections, and then the Tasks tab.
The above is applicable to an office environment that requires a Proxy setup. For others that close the proxy connection, please do not check the box named “This network connects to the Internet” and skip the following procedures. 3. Enter the name into the “Proxy server” field. 4. Select the Advanced button and enter the advanced settings screen. 5. You can modify the settings by tapping the HTTP type. 6. Enter the number into the “Port” field. Finally, tap exit.
6 Item Operating System Specifications / Description Windows Mobile™ 6.1 for Pocket PC Phone Edition Processor Samsung SC3 6410, 533 with one DRAM Memory 256 MB ROM, 128 MB RAM Display 3.8" WVGA, 65,536 colors TFT-LCD touch panel/touch window (Resolution: 800 x 480) Dimensions 119 (L) x 62 (W) x 17.1 (H) mm Weight 188g (including Battery & Stylus) Communication HSDPA / UMTS (2100/1900/850 MHz) Quad-Bands GSM: 850/900/1800/1900 MHz EDGE class 10/GPRS class 10 Wireless LAN 802.
Item Power supply Description Battery: 1530 mAh Li-Ion Polymer, rechargeable, replaceable AC Adapter: 100~240 VAC/50~60 Hz, 5V/1A DC Environmental temperature 6-2 Daily operation: 0°c ~ 40°c; storage: -10°c ~ 50°c
7 Appendix / Disposal and recycling information Do not throw this electronic device into the trash when discarding. To minimize pollution and ensure utmost protection of the global environment, please recycle. For more information on the Waste from Electrical and Electronics Equipment (WEEE) regulations, visit http://www.acer-group.com/public/Sustainability/ sustainability01.
Safety regulations Declaration of Conformity for EU countries Hereby, Acer, declares that this Smartphone series is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Compliant with Russian regulatory certification: LCD pixel statement The LCD unit is produced with high-precision manufacturing techniques. Nevertheless, some pixels may occasionally misfire or appear as black or red dots.
General This product complies with the radio frequency and safety standards of any country or region in which it has been approved for wireless use. Depending on configuration, this product may or may not contain wireless radio devices (such as wireless LAN and/or Bluetooth modules). Information below is for products with such devices.
use, the actual SAR level is usually much lower than the maximum value, because the mobile telephone works in different output levels. It only transmits with as much output as is required to reach the network. In general the following applies: The closer you are to a base station, the lower the transmission output of your mobile telephone. The highest SAR value for this device, measured in accordance with the standard, is x W/kg.
--Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. --Consult the dealer or an experienced radio/TV technician for help. RF exposure warning: The equipment complies with FCC RF exposure limits set forth for an uncontrolled environment. The equipment must not be co-located or operating in conjunction with any other antenna or transmitter. This device complies with Part 15 of the FCC Rules.
7-6
First Version: Current Version: Number: March 2009 March 2009, Version 1 20090228
