User`s manual

6-33
Storage Manager
Pager Event Messaging
DPT Storage Manager for Windows NT can also send event messages to
alphanumeric paging devices. The messages are sent as e-mail to pagers
that support e-mail text message delivery.
NOTE: This feature should work with any alphanumeric paging
system that supports message delivery via e-mail. Contact
your service provider for specific information.
The following procedure applies to the system that is running the Storage
Manager Event Logger to monitor DPT controllers and attached disk
arrays.
To configure alphanumeric pager support, do the following:
1. Ensure your pager is working and activated through a service
provider.
2. Establish a permanent connection to an Internet service provider
(ISP) or create Dial-up Networking connection to your ISP.
3. Configure your e-mail client software to access your Internet mail
server.
4. Determine the e-mail addresses for the people you want to receive
event messages.
5. In Storage Manager:
a. Set the Display Threshold to the level where you want to start
broadcast messages.
b. Enable E-Mail to Users in the Event Broadcasting dialog
(Options–Event Broadcast Control).
c. Enter the e-mail addresses for the pagers in the E-Mail Users
list.
d. Click on OK to exit the dialog and save the changes.
When the Event Broadcaster is active, the Event Logger will send text
messages for selected events to the pager using the e-mail address you
specified.