Owner's Manual

English

If you prefer to set the boot priority for long-term use, you should select the

Boot submenu.

1 Turn on your computer and insert the first system recovery disc into the

optical disc drive. Restart your computer.

2 During startup when the Acer logo shows, press the F2 key to enter BIOS

Setup, where you can set system parameters.

3 Use the left and right arrow keys to select the Boot submenu.

4 Use the up and down arrow keys to select the optical drive device.

5 Use the F6 key to move the optical drive device to the highest boot

priority, or use the F5 key to move other devices to a lower boot priority.

Ensure that the optical drive device is the highest priority.

6 Press the ESC key to enter the Exit submenu, press the ENTER key to Exit

Saving Changes. Press the ENTER key again to select Yes. The system will

reboot.

7 When you reboot, Windows will be installed from the recovery disc.

8 Insert the second recovery disc when prompted, then follow the onscreen

prompts to complete the restore.

9 Remove the recovery disc from the optical drive once the restore is

complete. Do this before rebooting your computer.