User Manual

English
14
System Setting
Mode - Standard
DVI_D
Gaming
Picture
Color
Input
Audio
OSD
DP1.2
DDC/CI
System
Wide Mode
PIP/PBP
Normal
Auto Source
Quick Start Mode
Hot Key Assignment
Informaon
On
HDMI Black level
On
Save Seng to...
DP Format
Full
Mode - User
Gaming
Picture
Color
Audio
OSD
System
Quick Start Mode
Informaon
Save Seng to...
Off
Quick Start Mode
1. The Setting menu can be used to select the input and other important settings.
2. Press the MENU key to open the OSD.
3. Using the ▲/▼ keys, select Setting from the OSD. Then navigate to the setting you
wish to adjust.
4. Use the ◄/► keys to select the setting.
5. Input: Select the source from DVI_D or HDMI2.0 or DP.
6. Auto Source: Default is "on", support auto source.
7. HDMI Black level setting.
8. Wide mode: You can select which screen aspect you are using. The options are Aspect
and Full.
9. DDC/CI: Allows the monitor settings to be set through the software on the PC.
-----------------------------------------------------------------------------------------------------------
Note: DDC/CI, short for Display Data Channel/Command Interface, which allows monitor controls
to be sent via software.
10. Quick start mode setting.