User Manual

English

Installation

1. Turn off your computer and unplug your computer's power cord.

2. Connect the signal cable to the VGA and /or HDMI1.4 (optional) and /or DP (optional) input socket of the monitor,

and the VGA and /or HDMI1.4 (optional) and /or DP (optional) output socket of the graphics card on the computer.

Then tighten the thumbscrews on the signal cable connector.

3. Optional: Connect the audio input socket (AUDIO IN) of the LCD monitor and the line-out port on the computer with

the audio cable.

4. Insert the monitor power cable into the power port at the back of the monitor.

5. Connect the power adapter and power cord to the monitor, then to a properly grounded AC outlet.

VGA

Note: Audio output is only for audio output model. Please check user manual for more instruction.