Owners manual

EN-18
7. OD: Select Off, Normal, or Extreme.
8. Wide Mode: You can select which screen aspect you are using. The
options are Aspect and 1:1.
9. Over Clock (selective models): The monitor can be overclocked to a higher
refresh rate than advertised by the panel specification.
* This function allows you to reset the maximum refresh rate in the
NVIDIA Control Panel after rebooting. If nothing is displayed,
disconnect the DisplayPort cable and use the monitor’s on-screen
display to select a default refresh rate.
IMPORTANT: This device is designed to support refresh rate overclocking.
However, overclocking may result in system instability. If you
experience instability, try reducing the overclock to a lower
refresh rate through the on-screen display settings.
10. ULMB (Ultra Low Motion Blur): Adjust the slider to reduce motion blur
effect while you are watching fast-moving images. Please visit the NVIDIA
website for more information.
11. Power LED: You can set the power LED indicator to glow, go dimmer, or
go off.
12. Deep Sleep: Default is on. When the function is on, with no HDMI or DP
input after 12 minutes, the monitor will go to sleep mode. When the
function is off, with no HDMI or DP input, the monitor will not go to
sleep mode
13. Reset: Resets the custom color settings to the factory defaults.
14. Power-off USB charge: Turn On or Off.
Note: Pressing any button (except the Power button) on the monitor
may also wake up the monitor after it goes into deep sleep.