Manual

40
* Only for the rear camera.
Taking a photo
1. Ensure you have adjusted the settings described above.
2. Frame your subject and steady your smartphone.
3. Zoom in or out as needed.
4. Tap or press the camera button to take a picture.
Taking a panoramic photo
Panoramic mode allows you to take a series of five photos that the camera
application will ‘stitch’ together to make a single extended image.
1. To take a panoramic photo, select panoramic capture mode .
* Resolution:
Set the photo quality.
* Image adjustment:
Set Brightness, Contrast, Saturation, Sharpness, and Hue.
Scene mode:
Set Auto, Night, Sunset, Party, Portrait, Landscape, Night portrait, Theatre, Beach,
Snow, Steady photo, Fireworks, Sports, Candle light
* Set the white balance:
Auto, Daylight, Cloudy, Fluorescent, Incandescent.
* Set the timer:
Off, 5 seconds, 10 seconds, 15 seconds.
Select photo storage location:
Internal memory or SD card.
Set store location on (enables geotagging) or off. Please refer to "Geotagging" on
page 42.
* Exposure value:
Adjust from "-3" to "3" with "0" being the default.
* AE (Automatic Exposure) meter:
Spot, Center, Average
* Image sensor sensitivity to light:
Auto, 100, 200, 400, 800
* ZSD (Zero Shutter Delay) reduces time between when the button is pressed and
the photo is actually taken.
Can be turned either ON or OFF.
Golden line is a 9 x 9 grid that appears over the picture area.
Can be turned On or OFF.
Restore all settings to default.
Icon Description