Veriton 2800 Series User's Guide
Copyright © 2005. Acer Incorporated. All Rights Reserved. Veriton 2800 Series User's Guide Original Issue: August 2005 Changes may be made periodically to the information in this publication without obligation to notify any person of such revisions or changes. Such changes will be incorporated in new editions of this manual or supplementary documents and publications.
Disposal instructions Do not throw this electronic device into the trash when discarding. To minimize pollution and ensure utmost protection of the global environment, please recycle it. USA For electronic products containing an LCD/CRT monitor or display: Lamp(s) inside this product contain mercury and must be recycled or disposed of according to local, state or federal laws. For more information, contact the Electronic Industries Alliance at www.eiae.org.
Specifications Package contents Accessing the User's Guide 2 System tour Features Performance Multimedia Connectivity Front and rear panels Keyboard Internet/Email/Search keys Multimedia keys Volume control/mute keys Lock keys Cursor keys Windows keys Function keys Palm rest Optical drive Taking care of your CDs and DVDs Hard disk 3 Setting up your computer Arranging a comfortable work area Adjusting your chair Positioning your PC Positioning your monitor Positioning your keyboard Positioning your mouse C
Connecting multimedia devices Connecting USB devices 4 Upgrading your computer Installation precautions ESD precautions Preinstallation instructions Post-installation instructions Opening your Veriton 2800 To remove the computer cover To replace the computer cover System boards Mainboard layout Upgrading your computer Installing additional memory To remove a DDR2 DIMM To install a DDR2 DIMM To reconfigure your computer Replacing the Veriton 2800's hard disk Installing an expansion card 5 System utilities
Notice: Canadian users Declaration of Conformity for EU countries Modem notices Notice for USA TBR 21 Notice for Australia Important safety instructions Macrovision copyright protection notice Lithium battery statement Laser compliance statement Federal Communications Comission Declaration of Conformity Declaration of Conformity for CE marking 61 61 61 61 62 62 62 64 64 65 66 67 Appendix B: Taking care of your computer 69 Important tips Cleaning and servicing To clean your computer and keyboard To clean y
1 First things first
This chapter describes the system specifications and contents of your computer package.
3 Specifications Operating system Microsoft® Windows® XP Professional Platform Intel® Celeron® with 533 MHz FSB Microsoft® Windows® XP Home Edition Intel® Pentium® 4 with 800 MHz FSB Intel® Pentium® D with 1066 MHz Chipset Intel® 945G Express System memory Supporting up to 2 GB of DDR2 667 RAM Drives Network interface I/O interface • One external 5.25" drive bay • One 3.
4 1 First things first Management software Acer eManager Industry standards PC2001 Norton AntiVirus™ SMBIOS (DMI) 2.3.1 PCI 2.3 WFM 2.0 ACPI 2.0 Microsoft® OnNow ENERGY STAR MacroVision Power supply 250 W Certification FCC, CE, C-tick, BSMI, VCCI, CCC, cUL, UL, Nemko, GS (TUV), ENERGY STAR Note: The specifications listed above are for reference only. The exact configuration of your PC depends on the model purchased.
5 Package contents Before you unpack your computer, make sure that you have enough space to set up your computer. Carefully unpack the carton and remove the contents.
6 1 First things first
7 2 System tour
This chapter discusses the features and components of your computer.
9 Features Here are just a few of your computer's many features: Performance • Intel® Celeron® supporting 533 MHz FSB, or Intel® Pentium® 4 supporting 800 MHz FSB, or Intel® Pentium® D supporting 1066 MHz FSB • Intel® 945G Express chipset • DDR2 667, 2 DIMM slots, expandable to 2 GB • Power management function • CD-ROM, CD-RW, DVD-ROM, DVD/CD-RW combo, DVD-Dual or DVD-Super multi drive • High-capacity SATA hard disk Multimedia • Intel® high-definition audio • Supporting up to 7.
10 2 System tour Front and rear panels Your computer's front and rear panels consist of the following: Front panel No. Icon Component 1 5.25" drive bay 2 3.
11 Rear panel Your computer's rear panel consists of the following: No. Icon Component 1 Power supply (with full range voltage) 2 Power cord socket 3 PS/2 mouse port 4 PS/2 keyboard port 5 Serial port 6 Parallel/printer port 7 CRT/LCD monitor port 8 USB ports 9 Network port 10 Audio jack 11 Expansion slot 12 Chassis lock pad 13 Hardware reset button Audio jacks function table Color/Use Headphone 1.1 CH 3.1 CH 5.1 CH 7.
12 2 System tour Keyboard The keyboard has full-sized keys that include separate cursor keys, two Windows keys, four multimedia keys, and 12 function keys. For information on how to connect your keyboard, see "Connecting your mouse and keyboard" on page 23. No. Description No.
13 Internet/Email/Search keys Icon Key Description Web browser Launches your current default browser. Email Launches your email application. Search Opens a search window. Multimedia keys Allow you to conveniently play, pause, stop, advance or rewind a song or movie using your keyboard. Icon Key Description Backward Press to skip backward to the previous track or video file. Play/pause Press to start playing the audio track or video file. Press again to pause.
14 2 System tour Volume control/mute keys Icon Key Description Volume up Press to increase audio volume. Volume down Press to decrease audio volume. Mute Toggle sound on/off. Lock keys The keyboard has three lock keys which you can toggle on and off to switch between functions. Lock key Description Scroll Lock When activated, the screen moves one line up or down when you press the up arrow or down arrow, respectively. Num Lock When activated, the keypad is set to numeric mode, i.e.
15 Cursor keys The cursor keys, also called the arrow keys, let you move the cursor around the screen. They serve the same function as the arrow keys on the numeric keypad when the Num Lock is toggled off. Windows keys The keyboard has two keys that perform Windows-specific functions. Key Description Windows key Pressed alone, this key has the same effect as clicking on the Windows Start button; it launches the Start menu.
16 2 System tour Function keys The function keys, F1 - F12, let you perform specific functions, depending on the application that uses them. Palm rest The detachable palm rest provides you with a comfortable place to rest your hands while typing.
17 Optical drive Your computer may come with a CD-ROM, DVD-ROM, DVD/CD-RW combo, DVD-Dual or DVD-Super multi drive. This drive is located on the front panel of your computer. The CD drive allows you to play different types of compact disks (CDs). The DVD drive allows you to play not only old CD-ROMs, CD-I disks, and video CDs, but digital video disks (DVDs) as well. DVD-ROM is a type of disk media with enough storage space for a full-length movie.
18 2 System tour 2. When the disk tray slides open, place the CD or DVD gently on the tray. Make sure that the label or title side of the disk is facing upward. When holding a disk, hold it by the edges to avoid leaving smudges or fingerprints. 3. Push the tray and it will close automatically. Taking care of your CDs and DVDs • Keep your disk in its case when not in use to avoid scratches or other damage.
3 Setting up your computer
This chapter contains step-by-step instructions on how to set up your computer and connect additional peripherals.
21 Arranging a comfortable work area Working safely and comfortably begins with the arrangement of your work space and the proper use of equipment. For this reason, it is very important to take time and think about how you are going to arrange your work area. Refer to the diagram on the following page as you set up your system. Here are some points to consider: Adjusting your chair Having the right kind of chair does not necessarily mean you'll be properly supported.
22 3 Setting up your computer Take note of the following when selecting a location for your computer: • Do not put your computer near any equipment that might cause electromagnetic or radio frequency interference, such as radio transmitters, televisions, copy machines or heating and air-conditioning equipment. • Avoid dusty areas and extremes of temperature and humidity.
23 Connecting peripherals Setting up your computer is easy. For the most part, you only have four things to connect: the mouse, the keyboard, the monitor, and the power cable. Note: The peripherals shown in the connections below are for your reference only. Actual device models may vary in select countries. Connecting your mouse and keyboard USB interface Plug your USB mouse or keyboard cable into any of the USB ports on the front and rear panels of your computer.
24 3 Setting up your computer Connecting a monitor To connect a monitor, simply plug the monitor cable into the monitor port (blue port) located on the rear panel of your computer . Note: When a VGA card is added to the PCI Express slot, the monitor should be connected to the add-on card and the onboard VGA will be disabled. Note: Refer to the monitor manual for additional instructions and information.
25 Connecting the power cable Plug the power cable into the power cable socket located on the rear panel of your computer. Then plug the other end of the power cable into a power outlet.
26 3 Setting up your computer Turning on your computer After connecting the necessary peripherals and plugging in the power cable, you are now ready to turn the computer on and get to work. To turn on your computer: 1 Turn on all peripherals connected to your computer, such as the monitor, printer, speakers, etc. 2 On the front panel of your computer, press the Power button. Important: Make sure that the power cable is properly plugged into an electrical outlet.
27 Connecting options Connecting your printer Your computer supports parallel, serial and USB printers. To connect a parallel printer, plug the printer cable into the parallel port (burgundy port) located on the rear panel of your computer. Note: The printer shown below is for your reference only. Actual device model may vary by country. Note: If you are using a serial printer, connect the printer cable into the serial port located on the rear panel of your computer.
28 3 Setting up your computer Connecting the modem (optional) Set up your modem connection by plugging the telephone line and handset line your computer. into their corresponding ports on the rear panel of Connecting to the network You can connect your computer to a Local Area Network (LAN) using a network cable. To do so, simply plug the network cable into the network port the rear panel of your computer.
29 Connecting multimedia devices You can connect multimedia devices such as microphones, earphones or headphones, external speakers and audio line-in devices. These devices will let you take advantage of your computer's multimedia features. Note: The multimedia devices shown below are for reference only. Actual device models may vary in select countries. Plug the devices in as follows: • Microphone: Connects to the Microphone-in jacks on the front and rear panels of your computer.
30 • 3 Setting up your computer Earphones, headphones: Connect to the headphone jack the front panel of your computer. located on Note: To adjust the headphone volume, use the volume control buttons on the keyboard. You can also adjust the volume by using the volume icon on the taskbar at the bottom of your screen. • External speakers: Connect to the audio-out/line-out jack jack) located on the rear panel of your computer.
31 • Audio line-in device: Connects to the audio-in/line-in jack (light blue jack) located on the rear panel of your computer Connecting USB devices Universal Serial Bus (USB) is a serial bus design capable of cascading peripherals such as a digital camera, keyboard, mouse, joystick, scanner, printer and modem. With USB, complex cable connections can be eliminated. Your computer comes with eight external USB ports: four on the front and four on the rear panel. These ports support USB 2.
32 3 Setting up your computer To connect a USB device, simply plug the device cable into any of the USB ports (black) located on the front and rear panels of your computer. Note: The USB devices shown below are for reference only. Actual device models may vary by geographic region. Note: Some USB devices have a built-in USB port which permits you to connect more USB devices.
4 Upgrading your computer
This chapter contains instructions on how to upgrade your computer, and basic information about your system boards that you will find helpful when performing the upgrade process.
35 Installation precautions Before you install any computer component, we recommend that you read the following sections. These sections contain important ESD precautions along with preinstallation and post-installation instructions. ESD precautions Electrostatic discharge (ESD) can damage your processor, disk drives, expansion boards, and other components.
36 4 Upgrading your computer Post-installation instructions Observe the following after installing a computer component: 1 See to it that the components are installed according to the step-by-step instructions in their respective sections. 2 Replace any expansion boards or peripherals that you removed earlier. 3 Replace the side panels. 4 Connect the necessary cables and turn on your computer.
37 Opening your Veriton 2800 Caution! Before you proceed, make sure that you have turned off your computer and all peripherals connected to it. Read the "Preinstallation instructions" on page 35. You need to open your computer before you can install additional components. See the following section for instructions: To remove the computer cover 1 Turn off your computer and unplug all cables. 2 Place your computer on a flat, steady surface.
38 4 Upgrading your computer System boards Mainboard layout The mainboard becomes accessible once you open your computer. Refer to the section below for the mainboard layout of your Veriton 2800 computer. 6 15 7 14 5 3 11 16 17 2 13 4 10 8 9 1 12 No. Component No.
39 Upgrading your computer Certain components of your computer are upgradeable, such as the memory, the hard disk, the CPU and the expansion cards. You need to observe the "Installation precautions" on page 35 when installing or removing a computer component. However, for safety purposes, we do not recommend that you perform these upgrades yourself. If you want to replace or upgrade any of these components, contact your dealer or a qualified service technician for assistance.
40 3 4 Upgrading your computer Press the holding clips on both sides of the DDR2 DIMM socket outward to release the DDR2 DIMM (a). Gently pull the DDR2 DIMM out of the socket (b). To install a DDR2 DIMM 1 Locate the DDR2 DIMM socket on the mainboard. 2 Align the DDR2 DIMM with the socket (a). Press the DDR2 DIMM into the socket until the clips lock onto the DDR2 DIMM (b). Note: The DDR2 DIMM sockets are slotted to ensure proper installation.
41 To reconfigure your computer Your computer automatically detects the amount of memory installed. Run the BIOS utility to view the new value for total system memory and make a note of it. Replacing the Veriton 2800's hard disk Follow these steps to replace your computer's hard disk: 1 Remove the computer cover. 2 Detach all cables connected to the optical disk and hard disk. Remove the optical disk and attached hard disk carrier. 3 Remove the screws that hold the hard disk into the carrier.
42 4 Upgrading your computer 4 Remove the bracket. 5 Remove the riser card from its protective packaging. 6 Align the riser card to the PCI Express slot (and PCI slot if necessary). Make sure that the card is properly seated. 7 Remove the expansion card from its protective packaging. 8 Align the expansion card with the slot on the riser card, and firmly press it. Make sure the expansion card is properly seated. 9 Secure the card to your computer with the bracket screw you removed earlier.
5 System utilities
This chapter describes applications that are preinstalled on your computer.
45 Depending on the hardware and optional features installed in your computer, your system came bundled with several program utilities designed to streamline your computer's operations.
46 5 System utilities Norton AntiVirus Norton AntiVirus is an anti-virus software that finds and repairs infected files, and protects against viruses to keep your computer data safe and secure. How do I check for viruses? A Full System Scan scans all files on your computer. To perform a system scan: 1 Start Norton AntiVirus. Double click on the Norton AntiVirus Icon on the desktop or click on the Start menu in the Windows taskbar, highlight Programs, and select Norton AntiVirus.
47 NTI CD&DVD-Maker (for models with CD or DVD Burner) The NTI CD&DVD-Maker is optical disk-recording software that allows you to create and copy audio, data and videos to recordable or rewritable optical disks. To copy an audio or data disk: 1 Click the Quick Burning icon on the desktop. 2 Insert the CD you would like to copy into the source drive and a blank disk into the target drive. 3 Choose the source and target drives from the pull-down lists. 4 Click the Start button to begin copying.
48 5 System utilities PowerDVD (for models with DVD) PowerDVD is a high-quality, pure software DVD player that brings high-quality movies and karaoke to your multimedia PC. You can play back high-resolution DVD titles or MPEG-2 files with MPEG-2 video and Dolby Digital (AC-3) audio. PowerDVD provides a complete set of commands for navigation and advanced features such as multi-angle switching, multi-language and multi-subtitle selection, and parental control.
49 BIOS utility The BIOS utility is a hardware configuration program built into your computer's Basic Input/Output System (BIOS). Since most computers are already properly configured and optimized, there is no need to run this utility. However, if you encounter configuration problems and get the "Run Setup" message, you will need to run this utility. Note: Before you run BIOS, make sure that you have saved all open files. The computer reboots immediately after you exit Setup.
50 5 System utilities You can also follow the steps below: 1 Locate the hardware reset button. See "Front and rear panels" on page 10. 2 Press the button. After a moment, one of the following screens will appear on your display. Please type in your password. 3 Select "System Recovery.
51 4 Select "Factory Default Image.
52 5 5 System utilities You should see the following screen: Caution! Running the recovery operation will erase all files previously saved on your computer so make sure to back up your important files before starting the recovery process. Note: This feature occupies 2 GB in a hidden partition on your hard drive. 6 If you attempt to restore your system using Acer eRecovery, and the system DOES NOT respond, contact your local vendor or authorised Acer representative immediately.
53 Using backup (Windows XP only) The Backup utility creates copies of information on your hard disk. In the event that the original data on your hard disk is erased or overwritten, or becomes inaccessible because of a hard disk malfunction, you can use the copy to restore your lost or damaged data. How do I back up files from my hard drive? To run the Backup utility: 1 Click the Start button in the taskbar.
54 5 System utilities Disk defragmenter (Windows XP only) The disk degfragmentation utility consolidates files and folders on your computer's hard disk. This allows your computer to access files and folders and save new data more efficiently. By consolidating your files and folders, the defragmenter also consolidates the volume's free space, making it less likely that new files will be fragmented. How do I defragment my hard drive? To run the Disk Defragmenter: 1 Click the Start button in the taskbar.
7 Frequently asked questions
This chapter tells you what to do in case your computer is not working properly. However, if a more serious problem arises, contact your dealer or the technical support center (www.acersupport.com) for assistance.
57 Frequently asked questions The following questions indicate possible situations that may arise during the use of your computer and each is followed by easy answers and solutions. I pressed the power switch but the system did not boot up. Check the LED located above the power switch. If the LED is not lit, no power is being applied to the system. Try the following: • Check if the voltage selector switch located on the rear panel of the computer is set to the correct voltage.
58 7 Frequently asked questions The printer does not work. Do the following: • Make sure the printer is connected to a power outlet and that it is turned on. • Make sure the printer cable is connected securely to the system's parallel or USB port and the corresponding port on the printer. See "Connecting your printer" on page 27 for more information. • For additional information concerning the printer, refer to the printer's documentation. No sound comes out from the computer.
Appendix A: Notices
60 Appendix A: Notices ENERGY STAR guidelines compliance As an ENERGY STAR partner, Acer Inc. has determined that this product meets the ENERGY STAR guidelines for energy efficiency. FCC notice This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
61 Operation conditions This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Notice: Canadian users This Class B digital apparatus complies with Canadian ICES-003.
62 Appendix A: Notices Caution: To reduce the risk of fire, use only No. 26 AWG or larger UL Listed or CSA Certified Telecommunication Line Cord. TBR 21 This equipment has been approved [Council Decision 98/482/EC — "TBR 21"] for single terminal connection to the Public Switched Telephone Network (PSTN).
63 8 If an extension cord is used with this product, make sure that the total ampere rating of the equipment plugged into the extension cord does not exceed the extension cord ampere rating. Also, make sure that the total rating of all products plugged into the wall outlet does not exceed the fuse rating. 9 Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock.
64 Appendix A: Notices Macrovision copyright protection notice This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited. U.S. Patent Nos. 4,631,603; 4,819,098; 4,907,093; 5,315,448; and 6,516,132.
65 Laser compliance statement The CD or DVD drive used with this computer is a laser product. The CD or DVD drive's classification label content (shown below) is located on the drive. CLASS 1 LASER PRODUCT CAUTION: INVISIBLE LASER RADIATION WHEN OPEN. AVOID EXPOSURE TO BEAM. APPAREIL A LASER DE CLASSE 1 PRODUIT LASERATTENTION: RADIATION DU FAISCEAU LASER INVISIBLE EN CAS D'OUVERTURE. EVITTER TOUTE EXPOSITION AUX RAYONS.
66 Appendix A: Notices Federal Communications Comission Declaration of Conformity This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
67 Declaration of Conformity for CE marking Name of manufacturer: Acer Inc. Address of manufacturer: 8F, 88, Sec. 1, Hsin Tai Wu Rd.
68 Appendix A: Notices
Appendix B: Taking care of your computer
70 Appendix B: Taking care of your computer Please read the important instructions listed in this section. Following these instructions will help you maximize the durability of your computer. Important tips • Do not expose the computer to direct sunlight. Do not place it near sources of heat, such as a radiator. • Do not expose the computer to temperatures below 0 ºC (32 ºF), or above 35 ºC (95 ºF). • Do not subject the computer to magnetic fields. • Do not expose the computer to rain or moisture.
71 To clean your pointing device To clean a regular mouse (with rubber ball) 1 Open the circular cover underneath the mouse. 2 Take out the rubber ball and wipe it with a soft, water-moistened cloth. 3 Put the ball back and close the cover. To clean an optical mouse For users of an optical mouse, refer to the documentation that came with your mouse for maintenance instructions. To clean your monitor Make sure that you keep your screen clean.
72 Appendix B: Taking care of your computer
73 I A accessing the online User’s Guide applications 45 5 internet/suspend key email 13 suspend 13 web browser 13 K B BIOS utility 57 49 C computer cover remove 37 replace 37 computer maintenance 70 cleaning 70 servicing 70 connecting options multimedia devices 29 audio line-in device 31 earphones/headphones 30 external speakers 29 microphone 29 network 27, 28 printer 27 serial mouse 28 USB devices 31 D disk drives CD-ROM/DVD-ROM/CD-RW drive inserting CDs/DVDs 17 taking care CDs/DVDs 18 hard disk
English 74 mouse 22 software 45 Norton AntiVirus 46 system boards 38 mainboard 38 system utilities Acrobat Reader 45 Norton AntiVirus 46 NTI CD-Maker 47 PowerDVD 48 reinstalling programs 49 T turning off computer 26 software shutdown 26 suspend mode 26 turning on computer 26 power button 26 U upgrade add memory 39 install DDR DIMM 40 reconfigure computer 41 computer 39 install an expansion card 41 installation precautions post-installation 36 replace components memory 39 V Veriton mainboard layout 38
