user manual
Table Of Contents
- 1 First things first
- 2 System tour
- 3 Setting up your computer
- 4 Upgrading your computer
- 5 System utilities
- 6 Frequently asked questions
- Energy Star Guidelines Compliance
- FCC notice
- Notice: Canadian users
- Declaration of Conformity for EU countries
- Modem notices
- Important safety instructions
- Macrovision copyright protection notice
- Lithium battery statement
- Laser compliance statement
- Declaration of Conformity for CE marking
- Federal Communications Comission Declaration of Conformity
- Appendix A: Notices
- Appendix B: Taking care of your computer
6 Frequently asked questions88
Q: Nothing appears on the screen.
A: Your computer’s power management function automatically blanks
the screen to save power. Just press any key to turn the display back
on.
If pressing a key does not work, contact your dealer or the technical
support center for assistance.
Q: The printer does not work.
A: Do the following:
• Make sure that the printer is connected to a power outlet and that
it is turned on.
• Make sure that the printer cable is connected securely to the
system’s parallel port and the corresponding port on the printer.
See “Connecting your printer” on page 40 for information on how
to connect the printer to your computer.
• For additional information concerning the printer, refer to the
printer’s documentation.
Q: No sound comes out from the computer.
A: Check the following:
• The volume may be muted. Look for the Volume icon on the
taskbar. If it is crossed-out, click on the icon and deselect the Mute
option. You can also press the volume control/mute knob on your
USB keyboard to toggle from mute to sound on.
• If headphones, earphones, or external speakers are connected to
the line-out jack of your computer, the internal or built-in speakers
are automatically turned off.