Veriton 3600GT/3600V User’s guide
Copyright © 2003 Acer Incorporated All Rights Reserved. Veriton 3600GT/3600V User’s guide Original issue date: November 2003 Changes may be made periodically to the information in this publication without obligation to notify any person of such revision or changes. Such changes will be incorporated in new editions of this manual or supplementary documents and publications.
1 First things first 1 System specifications Package contents Accessing the user’s guide 3 5 6 2 System tour 7 Features Performance Multimedia Connectivity Front panel Rear panel - VT3600G Keyboard Internet/E-mail/Search keys Multimedia keys Volume control/Mute keys Lock keys Cursor keys Windows keys Function keys Palm rest Optical drive Hard disk 3 Setting up your computer Arranging a comfortable work area Adjusting your chair Positioning your PC Positioning your monitor Positioning your keyboard Po
iv Contents Connecting USB devices 46 4 Upgrading your computer 47 Installation precautions ESD precautions Preinstallation instructions Post-installation instructions Opening your computer To remove the computer cover To replace the computer cover Internal components System boards Mainboard layout Audio board Upgrading your computer Installing additional memory Replacing the hard disk Installing an expansion card 49 49 49 50 51 51 52 53 54 54 57 58 58 60 63 5 System utilities Acrobat Reader Acer LA
v Lithium battery statement Laser compliance statement Declaration of Conformity for CE marking Federal Communications Comission Declaration of Conformity Appendix B: Taking care of your computer Important tips Cleaning and servicing Asking for technical assistance Index 96 96 98 99 101 102 102 103 105
vi Contents
1 First things first
This chapter describes the system specifications and the contents of your computer package.
3 System specifications Component Specification Processor • Intel® Pentium® 4 2.0~3.6 GHz • Intel®Celeron® 2.0 - 2.6 GHz System memory Chipset Graphics Four SDRAM slots support a maximum of 4 GB dualchannel DDR memory • Intel® 865G+ICH5(3600GT) • Intel® 865GV+ICH5(3600V) Intel® 865G supporting: • DVMT technology • Dual Display Audio AC ’97 Codec LAN 10/100/1000 Base-T Gigabit Ethernet connectivity IDE Two 40 pin parallel ATA IDE slots Two Serial ATA ports FDD 1.44 MB 3.
4 1 First things first Component Specification Wake system Wake on LAN Wake on modem Mouse/keyboard HDD Optical Drive • Paralle ATA (5400, 7200 RPM) • Serial ATA (7200 RPM) CD-ROM, CD-RW, DVD-ROM, DVD/CD-RW combo or DVD+/-RW, or DVD-RAM(Supermulti plus) drive Operating system • Windows® 2000 • Windows® XP Home • Windows® XP Professional • Novell®/SCO® Unix/Red Hat® Linux (driver support) Dimensions • Small Form Factor 345mm(H) /101.3mm(W) /414.7mm(D) Weight • Small Form Factor 5.
5 Package contents Before you unpack your computer, make sure that you have enough space to set up your computer. Carefully unpack the carton and remove the contents.
6 1 First things first Accessing the user’s guide This user’s guide is also available on your computer as an Adobe Acrobat PDF file. To access the user’s guide (for Windows® XP) 1 On the Windows® XP taskbar, click on the Start button then select Help and Support Center. 2 On the Help and Support Center home page, double-click the Veriton 3600 series Online icon. To access the user’s guide (for Windows® 2000) 1 Double-click on the Veriton 3600 series Online icon on your Windows® desktop.
2 System tour
This chapter discusses the features and components of your computer.
9 Features Here are just a few of your computer’s many features: Performance • Intel® Pentium® 4/Celeron® supporting FSB(Front Side Bus) up to 800 /400MHz and HyperThreading Technology™ • Intel® 865G+ICH5 (for 3600GT) or 865GV+ICH5(for 3600V) chipset • DDR-SDRAM 400/333/266, 4 DIMM slots, Expandable to 4GB dualchannel memory • Power management function • CD-ROM, CD-RW, DVD-ROM, DVD/CD-RW combo, DVD+/-RW, or DVD-RAM(Supermulti plus) drive • High-capacity, Enhanced-IDE hard disk Multimedia • 3-
10 2 System tour Front panel Your computer’s front panel consists of the following: 1 13 2 12 11 10 9 3 4 8 5 7 6 Label 1 Icon Component 5.
11 Label Icon Component 2 5.25-inch optical drive bay 3 Floppy drive eject button 4 3.5-inch floppy drive 5 Floppy drive light-emitting diode (LED) 6 Microphone-in jack (front) see note 7 Headphone-out port 8 USB ports 9 OBR(One Button Recovery) slot 10 Hard disk activity LED 11 LAN activity LED 12 Power LED 13 Power button Note: The system has two microphone-in jacks (front and rear). However, you can not use both of them at the same time.
12 2 System tour Rear panel Your computer’s rear panel consists of the following: 16 1 15 2 3 4 5 6 7 8 9 10 11 12 13 14
13 Label Icon Color 1 Component Power supply 2 Green PS/2 mouse port 3 Purple PS/2 keyboard port 4/9 Black USB ports 5 Teal or Turquoise Serial port 6 Burgundy Parallel/Printer port 7 Blue Monitor port (On-die VGA) 8 White Network port 10 Pink Microphone-in jack (rear) 11 Lime Audio-out/Line-out jack 12 Light blue Audio-in/Line-in jack 13 Expansion slots 14 Chassis lock pad 15 Voltage selector switch 16 Power cord socket For information on how to connect the perip
14 2 System tour Keyboard The keyboard that came with your computer has full-sized keys that include separate cursor keys, two Windows keys, four multimedia keys and twelve function keys. For information on how to connect your USB keyboard, please see “Connecting peripherals” on page 32. No. Description No.
15 Internet/E-mail/Search keys Icon Key Description Web browser Launches your current default browser. Email Launches your email application. Search Opens a search window.
16 2 System tour Multimedia keys Allow you to conveniently play, pause, stop, step forward, or step back a song or movie using your keyboard. Icon Key Description Backward Press to skip backward to the previous track or video file and start playing. Play/Pause Press to start playing the audio track or video file. Press again to pause. Stop Press to stop playing the audio track or video file. Forward Press to skip forward to the next track or video file and start playing.
17 Volume control/Mute keys . Icon Key Description Volume up Press to increase audio volume. Volume down Press to decrease audio volume. Mute Toggle sound on/off.
18 2 System tour Lock keys The keyboard has three lock keys which you can toggle on and off to switch between two functions. Lock key Description Scroll Lock When activated, the screen moves one line up or down when you press the up arrow or down arrow respectively. Take note that Scroll Lock may not work with some applications. Num Lock When activated, the keypad is set to numeric mode; i.e., the keys function as a calculator (complete with arithmetic operators such as +, -, * and /).
19 Cursor keys The cursor keys, also called the arrow keys, let you move the cursor around the screen. They serve the same function as the arrow keys on the numeric keypad when the Num Lock is toggled off.
20 2 System tour Windows keys The keyboard has two keys that perform Windows-specific functions. Key Description Windows logo key Start button.
21 Function keys The function keys, F1 - F12, let you perform specific functions, depending on the application that uses them. Palm rest The detachable palm rest provides you a comfortable place to rest your hands while typing.
22 2 System tour Optical drive Your computer may come with a CD-ROM, DVD-ROM or a combo DVD/ CD-RW, DVD+/-RW, or DVD-RAM(Supermulti plus) drive. This drive is located on the front panel of your computer. The CD-ROM drive allows you to play different types of compact discs (CDs). The DVD-ROM drive allows you to play not only old CD-ROMs, CD-I discs, and video CDs, but digital video discs (DVDs) as well. DVD or DVD-ROM is a type of disc media that holds a minimum of 4.
23 2 When the disc tray slides open, place the CD or DVD gently on the tray. Make sure that the label or title side of the disc is facing upward. When holding a disc, hold it by the edges to avoid leaving smudges or fingerprints. 3 Push the Eject button again to close the tray. To take care of your CDs and DVDs: • Keep your discs in a disk case when not in use to avoid scratches or other damage.
24 2 System tour Hard disk Your computer is preinstalled with a high-capacity Enhanced-IDE (E-IDE) hard disk. Refer to “Replacing the hard disk” on page 60 for instructions on how to upgrade or replace your hard disk.
3 Setting up your computer
This chapter contains step-by-step instructions on how to set up your computer and connect additional peripherals.
27 Arranging a comfortable work area Working safely begins with the arrangement of your work space and the proper use of equipment. For this reason, it is very important to take time and think about how you are going to arrange your work area. Here are some points to consider: Adjusting your chair Having the right kind of chair does not necessarily mean that you’ll be properly supported. It is necessary to adjust your chair to fit your body.
28 2 3 Setting up your computer Turn out the foot stands to the slots on the housing frame (b) as shown in the figure below:
29 To position your PC in a desktop or horizontal position: 1 Attach the foot stands as shown in the figure that follows. 2 Place your computer in the desired location. Take note of the following when selecting a location for your computer: • Do not put your computer near any equipment that might cause electromagnetic or radio frequency interference such as radio transmitters, televisions, copy machines, or heating and airconditioning equipment.
30 3 Setting up your computer Positioning your monitor Place your monitor at a comfortable viewing distance, usually 50 to 60 centimeters away. Adjust the display in such a way that the top of the screen is at or slightly below eye level. Positioning your keyboard The location of the keyboard is a very important factor to your posture. Placing it too far away will make your body lean forward forcing you to sit in an unnatural position. Placing it too high will add tension to your shoulder muscles.
31 keyboard beside your monitor will make you turn your head while you type which could add tension to your neck muscles that may later result in neck strain. Positioning your mouse • The mouse should be placed on the same surface as your keyboard so that you can reach it with ease. • Adjust its position to allow enough space for movement without making you stretch or lean over. • Use your arm to move the mouse. Do not rest your wrist on the table when moving the mouse.
32 3 Setting up your computer Connecting peripherals Setting up your computer is easy. For the most part, you only have four things to connect: the mouse, the keyboard, the monitor, and the power cable. Note: The peripherals shown in the connections below are for your reference only. Actual device models may vary in select countries. Connecting your mouse USB mouse Plug your USB mouse cable into any of the USB ports (black) located on the front and rear panels of your computer.
33 PS/2 mouse Plug the PS/2 mouse cable into the PS/2 mouse port located on the rear panel of your computer.
34 3 Setting up your computer Connecting your keyboard USB keyboard Plug your USB keyboard cable into any of the USB ports (black port) located on the front and rear panel of your computer.
35 PS/2 keyboard Plug your PS/2 keyboard cable into the PS/2 keyboard port port) located on the rear panel of your computer.
36 3 Setting up your computer Connecting a monitor To connect a monitor, simply plug the monitor cable into the monitor port (blue port) located on the rear panel of your computer. Note: Refer to the monitor manual for additonal instructions and information on adjusting your monitors settings. Note: The image above shows the Vertion 3600G. Refer to pages 16 and/or 18 for the location of your monitor port(s).
37 Connecting the power cable Caution! Before you proceed, check the voltage range in your area. Make sure that it matches your computer’s voltage setting. If they don’t match, set your computer’s voltage selector switch to the voltage range applicable to your area. Set the voltage selector switch to the voltage range applicable to your area. Plug the power cable into the power cable socket located on the rear panel of your computer. Then plug the other end of the power cable into a power outlet.
38 3 Setting up your computer Turning on your computer After connecting the necessary peripherals and plugging in the power cable, you are now ready to turn the computer on and get to work. To turn on your computer: 1 Turn on all peripherals connected to your computer such as the monitor, printer, fax, speakers, etc. 2 On the front panel of your computer, press the Power button. Important: Make sure that the power cable is properly plugged into an electrical outlet.
39 Turning off your computer To turn off your computer, follow the steps below. For Windows® XP: 1 On the Windows® XP taskbar, click on the Start button, and click Turn Off Computer; then click Turn Off. 2 Turn off all peripherals connected to your computer. For Windows® 2000: 1 On the Windows® 2000 taskbar, click on the Start button, highlight Shut Down, select Shut down from the drop down window then click on OK. 2 Turn off all peripherals connected to your computer.
40 3 Setting up your computer Connecting options Connecting your printer Your computer supports parallel, serial and USB printers. To connect a parallel printer, plug the printer cable into the parallel port (burgundy port) located on the rear panel of your computer. Note: The printer shown below is for your reference only. Actual device model may vary in select countries. Note: If you are using a serial printer, connect the printer cable into the serial port located on the rear panel of your computer.
41 Connecting the modem (optional) Set up your modem connection by plugging the telephone line and handset line of your computer.
42 3 Setting up your computer Connecting to the network You can connect your computer to a Local Area Network (LAN) using a network cable. To do so, simply plug the network cable into the network port (white port) on the rear panel of your computer. Note: Consult your network system administrator or operating system manual for information on how to configure your network setup.
43 Connecting multimedia devices You can connect multimedia devices such as microphone, earphone or headphone, external speakers, and audio line-in device. These devices will allow you to take advantage of your computer’s multimedia features. Note: The multimedia devices shown below are for your reference only. Actual device models may vary in select countries.
44 • 3 Setting up your computer earphones, headphones: connect to the Headphone-out port (lime port) located on the front panel of your computer Note: To adjust the volume of the headphones, click on the Volume icon located on the taskbar at the bottom of your screen. When the Volume control pops up, drag the Volume control lever to the desired level. You can also use the Volume control button on the keyboard.
45 • audio line-in device: connect to the Audio-in/Line-in jack blue jack) located on the rear panel of your computer (light
46 3 Setting up your computer Connecting USB devices Universal Serial Bus (USB) is a serial bus design that is capable of cascading peripherals such as a digital camera, keyboard, mouse, joystick, scanner, printer and modem. With USB, complex cable connections can be eliminated. Your computer comes with eight USB ports: four on the front and another four on the rear panel. These ports support USB 2.0 highperformance external devices such as webcams and digital still cameras.
4 Upgrading your computer
This chapter contains instructions on how to upgrade your computer and basic information about your system boards that you will find helpful when performing the upgrade process.
49 Installation precautions Before you install any computer component, we recommend that you read the following sections. These sections contain important ESD precautions along with preinstallation and post-installation instructions. ESD precautions Electrostatic discharge (ESD) can damage your processor, disk drives, expansion boards, and other components.
50 4 Upgrading your computer Post-installation instructions Observe the following after installing a computer component: 1 See to it that the components are installed according to the stepby-step instructions in their respective sections. 2 Replace any expansion boards or peripherals that you removed earlier. 3 Replace the computer cover. 4 Connect the necessary cables and turn on your computer.
51 Opening your computer Caution: Before you proceed, make sure that you have turned off your computer and all peripherals connected to it. Read the “Preinstallation instructions” on page 49. You need to open your computer before you can install additional components. See the following section for instructions. To remove the computer cover 1 Turn off your computer and unplug all cables. 2 Place your computer on a flat, steady surface.
52 4 Upgrading your computer To replace the computer cover 1 Align the cover’s hinges to the housing frame; then gently push it in to slide it back into place. Secure the cover with thumbscrews.
53 Internal components The figure below shows what your computer looks like once you remove the cover: Number Component 1 3.5-inch floppy drive 2 Optical drive 3 Drive frame 4 Power supply 5 Mainboard see note 6 Expansion slot Note: The mainboard model shown in the figure above may not be exactly the same with the one found in your computer.
54 4 Upgrading your computer System boards Mainboard layout The mainboard becomes accessible once you open your computer. Refer to the section below for the corresponding mainboard layout of your Veriton 3600 series computer model.
55 Label Component AGP1 AGP slot (VT3600GT only) see note AUD1 Line-in (top), line-out (middle), and rear microphonein (bottom) ports ATX1 Power connector BIOS1 BIOS chipset BT1 Battery CD1 CD-in connector COM2 Serial connector DLED1 D-Bracket (LANScope) connector DIMM1 DIMM sockets 1-4 DIMM2 DIMM3 DIMM4 FN1 3-pin CPU fan connector FN6 CPU ZIF socket FAN2 3-pin system fan connector FDD1 FDD connector IDE1 IDE 1 connector IDE2 IDE 2 connector JAUD1 Audio FPIO connector JBAT
56 4 Upgrading your computer Label Component JFP1 HDD LED, Power LED connector Power button and Reset switch controller JKBMS1 PS/2 mouse (upper) and keyboard (lower) ports JPW1 Power connector (12V power) JRECOVER One Touch Recovery button connector LPT1 Parallel/Printer port PCI1 to PCI3 PCI slots 1 to 3 SATA1 Serial HDD connectors SATA2 SER1 Serial port U10 Northbridge U19 Southbridge USB1 USB ports USB2 Front USB 2.0 connector USB3 Front USB 2.
57 Audio board The audio board that came with your computer should look like the figure that follows JUSB3, JUSB4 USB1~USB4 JAUD1 JMIC1 JSPK1 Label Description JUSB1 USB Connector - connects to the JUSB2 of the mainboard JUSB2 USB Connector - connects to the JUSB3 of the mainboard USB1 to USB4 USB ports JAUD1 Standard audio connector - connects to the JAUD1 of the mainboard JMIC1 Microphone-in jack JSPK1 Audio-out port Note: The system has two microphone-in jacks (front and rear).
58 4 Upgrading your computer Upgrading your computer Certain components of your computer are upgradeable such as the memory, the hard disk, the CPU and the expansion cards. You need to observe the “Installation precautions” on page 49 when installing or removing a computer component. However, for safety purposes, we do not recommend that you perform these upgrades yourself. If you want to replace or upgrade any of these components, contact your dealer or a qualified service technician for assistance.
59 3 Press the holding clips on both sides of the DDR DIMM socket outward to release the DDR DIMM (1,2). Gently pull the DDR DIMM out of the socket (3). To install a DDR DIMM 1 Locate the DDR DIMM socket on the mainboard.
60 2 4 Upgrading your computer Align the DDR DIMM with the socket (1). Press the DDR DIMM into the socket until the clips lock onto the DDR DIMM (2,3). Note: The DDR DIMM sockets are slotted to ensure proper installation. If you insert a DDR DIMM but it does not fit easily into the socket, you may have inserted it incorrectly. Turn the DDR DIMM around and try to insert it again. To reconfigure your computer Your computer automatically detects the amount of memory installed.
61 3 Lift the drive frame to a 90-degree angle; then pull out, and remove the drive frame.
62 4 Upgrading your computer 4 Pull out the drive rails that holdthe hard disk to the housing. Set the drive rails aside. 5 Slide the hard disk frame to the left (d); then gently move it out (e) and pull it up to detach it (f).
63 6 Install the new hard disk into the housing. Secure it with the drive rails you removed earlier and connect the power and hard disk cables to the new hard disk. 7 Reinstall the drive frame into the housing. 8 Reattach the CD or DVD drive and the floppy drive cables. Note: Make sure that the other ends of the disk drive cables are securely connected to their corresponding connectors on the mainboard. 9 Replace the computer cover (see page 52).
64 4 Upgrading your computer
5 System utilities
This chapter describes applications that are preinstalled on your computer.
67 Depending on the hardware and optional features installed in your computer, your system came bundled with several program utilities designed to streamline your computer’s operations.
68 5 System utilities Acrobat Reader Acrobat Reader is a software that lets you view, navigate, browse and print Adobe Portable Document Format (PDF) files on all major computer platforms. To read a PDF document • you can: Simply double click on any file with an icon like that shown above. or 1 On the windows taskbar, click on the Start button, highlight Programs, and select Acrobat Reader. 2 Once the program is running, select Open from the File menu.
69 Acer LANScope (optional) Acer LANScope allows desktop management via the Web, standard network, or dial-up connections. It is compatible with the leading management specifications, such as Wired for Management 2.0, Desktop Management Interface (DMI) v2.0, and others. Your computer may be bundled with a LANScope installation CD. To install LANScope: 1 Insert the LANScope installation CD into the optical drive.
70 5 System utilities Norton AntiVirus Norton AntiVirus is an anti-virus software which finds and repairs infected files, protects against viruses to keep your computer data safe and secure. It also scans incoming email attachments for viruses. It provides useful virus detection and repair facilities. How do I check for viruses using Norton AntiVirus? A full system scan scans all files on your computer.
71 You can schedule customized virus scans that run unattended on specific dates and times or at periodic intervals. If you are using the computer when the scheduled scan begins, it runs in the background so that you do not have to stop working. For more information about Norton AntiVirus, including setting up custom scans and scheduling scans, refer to the Norton AntiVirus Help menu.
72 5 System utilities NTI CD-Maker (for models with CD-RW) The NTI CD-Maker is a CD-Recording software which allows you to create and copy audio, data and videos to CD-R or CD-RW discs. To copy an audio or data disc: 1 Click the Quick Burning icon on the desktop. 2 Insert the CD you would like to copy into the source drive and a blank disc into the target drive. 3 Choose the source and target drives from the pull-down lists.
73 4 Click the Start button to begin copying. For more information about NTI CD-Maker and its other features, refer to the NTl CD-Maker Help menu.
74 5 System utilities PowerDVD (for models with DVD) PowerDVD is a high-quality, pure software DVD player which brings high-quality movies and karaoke to your multimedia PC. You can play back high resolution DVD titles or MPEG-2 files with MPEG-2 video and Dolby Digital (AC-3) audio. PowerDVD provides a complete set of commands for navigation and advanced features such as multi-angle switching, multi-language and multi-subtitle selection, and parental control.
75 BIOS utility The BIOS utility is a hardware configuration program built into your computer's Basic Input/Output System (BIOS). Since most computers are already properly configured and optimized, there is no need to run this utility. However, if you encounter configuration problems and get the "Run Setup" message, you will need to run this utility. Note: Before you run BIOS, make sure that you have saved all open files. The computer reboots immediately after you exit Setup.
76 5 System utilities Reinstalling programs If you uninstall one of the preinstalled programs and want to reinstall it, do the following: 1 Make sure that the system is turned on. 2 Insert the System CD into the CD or DVD drive. 3 Select the application that you want to reinstall. 4 Follow all onscreen instructions until you finish the installation.
77 Recovering your system IIf your operating system files are lost or damaged, the recovery process will restore your system's original factory default settings or last system backup. Your Acer Veriton series computer includes an OBR(One Button Recovery) button, a feature that makes restoring your system quick and easy. OBR works from a hidden partition on your hard drive that contains all the information required to restore your system. There are two modes to recovery your system.
78 5 System utilities You can also follow the steps below: 1 Locate the OBR button. See the image on page 10. 2 Press the button. After a moment one of the following screen will appear on your display a when you don’t backup your system yet..
79 3 In 2-a, click OK. You will be prompted again. In 2-b, select “Recover to Default Settings” to restore your system to the default factory settings. Select “Recover data from last backup” to restore your system to the last time system backup. Note: Click “Backup System” icon on the desktop to backup your system anytime.
80 5 System utilities 4 If you choosed your recovery option, you should see the following screen. Click OK to continue. 5 After 15 seconds the system will reboot and initiate the restore operation.
81 6 After the recovery operation finishes the system will reboot. You will be required to go through the setup process again. Caution! Running the Recovery operation will erase all files previously saved in your computer so make sure to back up your important files before starting the recovery process. If you attempt to restore your system using the One Button Recovery feature, and the system DOES NOT respond, contact your local vendor or authorised Acer representative immediately.
82 5 System utilities Using Backup (Windows XP only) The Backup utility creates copies of information on your hard disk. In the event that the original data on your hard disk is erased or overwritten, or becomes inaccessible because of a hark disk malfunction, you can use the copy to restore your lost or damaged data. How do I back up files from my hard drive? To run the Backup utility: 1 Click the Start button in the taskbar.
83 Disk Defragmenter (Windows XP only) The disk degfragmentation utility consolidates files and folders on your computer’s hard disk. This allows your computer to access files and folders and save new data more efficiently. By consolidating your files and folders, the defragmenter also consolidates the volume’s free space, making it less likely that new files will be fragmented. How do I defragment my hard drive? To run the Disk Defragmenter: 1 Click the Start button in the taskbar.
84 5 System utilities
6 Frequently asked questions
This chapter tells you what to do in case your computer is not working properly. However, if a more serious problem arises, contact your dealer or the technical support center (www.acersupport.com) for assistance.
87 The following questions are possible situations that may arise during the use of your computer and each is followed by easy answers and solutions to the situation. Q: I pressed the power switch but the system did not boot up. A: Check the LED located beside the power switch. If the LED is not lit, no power is being applied to the system. Do any of the following: • Check if the voltage selector switch located on the rear panel of the computer is set to the correct voltage.
88 6 Frequently asked questions Q: Nothing appears on the screen. A: Your computer’s power management function automatically blanks the screen to save power. Just press any key to turn the display back on. If pressing a key does not work, contact your dealer or the technical support center for assistance. Q: The printer does not work. A: Do the following: • Make sure that the printer is connected to a power outlet and that it is turned on.
89 Q: System cannot read diskette, hard disk, CD or DVD information. A: Check the following: • Make sure that you are using the correct type of disc. See page 22. • Make sure the CD or DVD is inserted into the drive correctly. • Check if the CD or DVD is clean and not scratched. • Check your drive by using a good (i.e., undamaged) disc. If your drive can not read the information on the good disc there may be a problem with the drive. Contact your dealer or technical support center for assistance.
90 6 Frequently asked questions
Appendix A: Notices
92 Appendix A: Notices Energy Star Guidelines Compliance As an Engery Partner, Acer Inc., has determined that this product meets the Energy Star guidelines for energy efficiency. FCC notice This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
93 Use conditions This part complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Notice: Canadian users This Class B digital apparatus meets all requirements of the Canadian InterferenceCausing Equipment Regulations.
94 Appendix A: Notices CAUTION: To reduce the risk of fire, use only No. 26 AWG or larger UL Listed or CSA Certified Telecommunication Line Cord. TBR 21 This equipment has been approved [Council Decision 98/482/EC - "TBR 21"] for panEuropean single terminal connection to the Public Switched Telephone Network (PSTN).
95 14 Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product. 15 Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage points or other risks. Refer all servicing to qualified service personnel.
96 Appendix A: Notices Lithium battery statement CAUTION Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to local regulations. Recycle if at all possible. ADVARSEL! Lithiumbatteri - Eksplosionsfare ved fejlagtig håndtering. Udskiftning må kun ske med batteri af samme fabrikat og type. Léver det brugte batteri tilbage til leverandøren.
97 APPAREIL A LASER DE CLASSE 1 PRODUIT LASERATTENTION: RADIATION DU FAISCEAU LASER INVISIBLE EN CAS D’OUVERTURE. EVITTER TOUTE EXPOSITION AUX RAYONS. LUOKAN 1 LASERLAITE LASER KLASSE 1 VORSICHT: UNSICHTBARE LASERSTRAHLUNG, WENN ABDECKUNG GEÖFFNET NICHT DEM STRAHLL AUSSETZEN PRODUCTO LÁSER DE LA CLASE I ADVERTENCIA: RADIACIÓN LÁSER INVISIBLE AL SER ABIERTO. EVITE EXPONERSE A LOS RAYOS. ADVARSEL: LASERSTRÅLING VEDÅBNING SE IKKE IND I STRÅLEN. VARO! LAVATTAESSA OLET ALTTINA LASERSÅTEILYLLE.
98 Appendix A: Notices Declaration of Conformity for CE marking Name of Manufacturer: Acer Inc. Address of Manufacturer: 8F, 88, Sec. 1, Hsin Tai Wu Rd., Hsichih, Taipei Hsien 221, Taiwan, R. O. C.
99 Federal Communications Comission Declaration of Conformity This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
100 Appendix A: Notices
Appendix B: Taking care of your computer
102 Appendix B: Taking care of your computer Please read the important instructions listed in this section. Following these instructions will help you maximize the durability of your computer. Important tips • Do not expose the computer to direct sunlight. Do not place it near sources of heat, such as a radiator. • Do not expose the computer to temperatures below 0oC (32oF), or above 40oC (104oF). • Do not subject the computer to magnetic fields. • Do not expose the computer to rain or moisture.
103 2 Use a soft cloth moistened with water and gently wipe the exterior of the computer and the keyboard. Do not use liquid or aerosol cleaners. To clean your pointing device To clean a regular mouse (with rubber ball) 1 Open the circular cover underneath the mouse. 2 Take out the rubber ball and wipe it with a soft, damp cloth. 3 Put the ball back and close the cover.
104 Appendix B: Taking care of your computer
105 Index I A accessing the user’s guide applications 67 6 B BIOS utility 75 internal components 53 internet/suspend key email 15 suspend 15 web browser 15 K keyboard 14 application key C L computer maintenance 102 cleaning 102 servicing 102 connecting options multimedia devices 43 audio line-in device 45 earphones/headphones 44 external speakers 43 joystick 43 microphone 43 network 40, 42 printer 40 USB devices 46 lock keys caps lock 18 num lock 18 scroll lock 18 D disk drives CD-ROM/DVD-ROM/C
106 USB keyboard 34 USB mouse 32 keyboard 30 monitor 30 mouse 31 software 67 Norton AntiVirus 70 system boards 54 audio board 57 mainboard 54 system utilities Acrobat Reader 68 Norton AntiVirus 70 NTI CD-Maker 72 PowerDVD 74 reinstalling programs 76 T turning off computer 39 software shutdown 39 suspend mode 39 turning on computer 38 power button 38 U upgrade add memory 58 install DDR DIMM 59 reconfigure computer 60 remove DDR DIMM 58 computer 54, 58 installation precautions 49 ESD 49 post-installation 5