Technical information

Chapter 3 59
Veriton 7900Pro Disassembly Procedure
This section tells you how to disassemble the system when you need to perform system service. Please also
refer to the disassembly video, if available.
CAUTION: Before you proceed, make sure you have turned off the system and all peripherals connected to it.
Opening the System
1. Place the system on a flat surface as shown.
2. Place the system as shown. Slide the chassis lock (highlighted in red circle) then slide the side door
outwards.
Removing the Front Panel and Top cover
1. Lift the front panel as shown and release the chassis locks.
