Manualshelf

User Guide

ManualsBrandsAcer ManualsComputers & AccessoriesNitro 34" 1500R Curved WQHD (3440 x 1440) VA Gaming Monitor with AMD Radeon Freesync, VESA Certified DisplayHDR400, 95% sRGB, 144Hz, 1ms VRB (Display Port & 2 x HDMI 2.0 Ports)
18192021222324252627
English
Adjusting the OSD
1. Press the MENU key to open the OSD.
2. Toggle the joystick to the up or don to select OSD from the OSD.Then toggle to the
right to
navigate to the element you wish to adjust and press the joystick to enter it.
3. Toggle to the left or right to adjust the sliding scales.
4. Language: Set the OSD menu language.
5. OSD timeout: Adjust the delay before turning off the OSD menu.
6. Transparency: Select the transparency when using gaming mode. The transparency
can be 0% (OFF), 20%, 40%, 60%, or 80%.
1.
Press the MENU key to open the OSD.
2. Toggle the joystick to the up or down to select System from the OSD.Then toggle to the
right to
navigate to the element you wish to adjust and press the joystick to enter it.
8. Aim point: Show an Aim point on the screen for shooting games.
13
7. OSD Lock: OSD Lock function after the start of all Key unavailable.
Adjusting the System
-------------------------------------------------------------------------------------------------------
Note: Aim Point is not supported in PBP mode.
-----------------------------------------------------------------------------------------------------------
Note: If FreeSync Premium set "On" you can see the V Frequency to changes in
the OSD.
6. VRB: Select Off, Normal, or Extreme.
1. If FreeSync Premium is "ON",then the VRB selection is set to
"OFF"automatically.
2. If FreeSync Premium is "OFF",then the user can set VRB to either one of the three
settings including: (a) Extreme (b) Normal (c) Off.
7. Refresh rate num: Display the panel’s current refresh rate on the screen.