User Guide

English

-----------------------------------------------------------------------------------------------------------

Note: DDC/CI, short for Display Data Channel/Command Interface, which allows

monitor controls to be sent via software.

11. HDMI Black Level: You can select the level of blackness under HDMI source.The options

are Normal and Low.

12.

Quick start mode: Select Off or On. Turn on to speed up boot speed.

Information

3. Toggle to the left or right to adjust the sliding scales.

4. Input: Select the source from HDMI1(2.0) ,HDMI2(2.0) ,DP(1.4).

5. Auto Source: Automatically searches for available input sources.

6. DP Format: Select the source from DP 1.1,DP1.2，DP1.4

7. Wide mode: You can select which screen aspect you are using. The options are Full,

Aspect.

8. PIP/PBP: The options for PIP/PBP Mode are Off, PIP Large, PIP Small, and PBP. You

can also adjust the PIP Position, Sub Source, Source Swap, and Audio Source.

9. Hotkey Assigment: Select the function of shortcut key 1(Modes, Brightness, Volume,

Gamma, Contrast, Blue Light, Over Drive,VRB) and shortcut keys 2 (Modes,

Brightness, Volume, Gamma, Contrast, Blue Light, Over Drive,VRB)

10. DDC/CI: Allows the monitor settings to be set through the software on the PC.

Save Setting to…(User mode only)

1. Press the MENU key to open the OSD.

Reset All Settings: Reset all settings to the defaults.