Acer LCD Monitor Quick Start Guide (QSG) Please read the following instructions carefully. 1. To clean the LCD monitor screen: Be sure that your monitor is electrically rated to operate with the AC power available in your location. • Turn off the LCD monitor and unplug the power cord. • Spray a non-solvent cleaning solution onto a rag and clean the screen gently. • NEVER SPRAY OR POUR ANY LIQUID DIRECTLY ONTO THE SCREEN OR CASE.
Adjusting the OSD settings English NOTE: The following content is for general reference only. Actual product specifications may vary. The OSD (on-screen display) can be used to adjust the settings of your LCD monitor. Press the MENU key to open the OSD. You can use the OSD to adjust the picture quality, OSD position and general settings. For advanced settings, please refer to the following pages: Main page 1. 2. 3. 4. 5.
The Function page Picture 1. Press the MENU key to open the OSD. 2. 3. 4. 5. Using the ▲ / ▼ keys, select Picture from the OSD.Then navigate to the picture element you wish to adjust. Use the / keys to adjust the sliding scales. The Picture menu can be used to adjust the Acer eColor, Blue Light, Brightness, Adaptive contrast, Contrast, and Dark boost. Brightness: Adjust the brightness from 0 to 100. 6. Contrast: Adjust the contrast from 0 to 100. 7.
English Color 1. Press the MENU key to open the OSD. 2. 3. 4. 5. 6. 7. Using the ▲ / ▼ keys, select Color from the OSD. Then navigate to the picture element you wish to adjust. Use the / keys to select the setting. Gamma mode allows you to adjust the luminance tone.The default value is 2.2 (standard value for Windows). Color temperature: Default is warm. You can choose Cool, Warm, Normal, Bluelight or User. Saturate: Color brightness can be changed by 0~200 adjustment.
English Setting 1. 2. The Setting menu can be used to select the screen menu language and other important settings, including input and OD level. Press the MENU key to open the OSD. 3. 4. 5. 6. 7. 8. 9. 10. Using the ▲ / ▼ keys, select Setting from the OSD. Then navigate to the setting yo wish to adjust. Use the / keys to select the setting. Input: Select the source from DP In, HDMI. DTS (selective models): Turn DTS Sound On or Off. DTS Sound is stratified and creates a remarkable sonic flow.
Standard timing table HDMI English Mode Resolution Remark 1 VGA 640 x 480 60 Hz 2 VGA 640 x 480P 59.94 Hz 3 VGA 640 x 480P 60 Hz 4 SDTV 720 x 576P 50 Hz 5 SDTV 720 x 480P 59.94 Hz 6 SDTV 720 x 480P 60 Hz 7 HD 1280 x 720P 50 Hz 8 HD 1280 x 720P 59.94 Hz 9 HD 1280 x 720P 60 Hz 10 FHD 1920 x 1080P 50 Hz 59.
For the following resolution: 2560 x 1080@60 Hz 2560 x 1080@85 Hz (DP only) 2560 x 1080@100 Hz (DP only) 2560 x 1080@120 Hz (DP only) 2560 x 1080@144 Hz (DP only) G-SYNC requires an NVIDIA GeForce GTX650Ti BOOST or higher GeForce GTX graphics card with a DisplayPort output. For more information, visit the nVidia® Website: http://www.nvidia.com/page/ home.
Regulations and safety notices English FCC notice This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
SPECIFICATION LCD Panel TFT Color LCD Size 35”W (89 cm) Pixel Pitch 0.32025 mm (H) x 0.32025 mm (V) Brightness 300 cd/m2 (Typical) Contrast 3000:1 Viewable Angle 178° (H) 178° (V) (CR=10) Response Time 4 ms (GTG) Panel Type VA H-Frequency HDMI 1.4: 30-140 KHz DP: 66-166 KHz V-Frequency HDMI 1.4: 24-60 Hz DP: 30-144 Hz English Driving System Display Colors 16.7 Million Dot Clock HDMI 1.