Use and Care Manual

STAINLESS STEEL PROFILES & EDGES
EASY INSTALLATION AND CARE INSTRUCTIONS
ACEROS SILVA LLC Stainless Steel Corner Edges are a luxury accent for any commercial or
residential project. Trims, corners and baseboards can be installed in any indoor/outdoor wall or
floor project.
*This product may have sharp edges. Use caution when handling and installing products. Wear
protective goggles and gloves.
INSTALLATION
● Remove the protective film prior to installation.
● Clean any dirt from the installation area with a soft, damp towel.
● Measure area and cut trims to the desired length. Use caution to avoid bending or
deforming the trim. appropriate tools and blade for the thickness and width Follow
standard procedure to with grout or apply metal silicone to the insides of the profile,
corner edge or toe kick.
● Press firmly until the product is secure. Avoid any movement until the adhesive is dry.
● Carefully remove any excess silicone.
CARE
● Clean product with a soft, damp towel.
● Stainless steel cleaners can be used to remove dirt, grease and increase shine.
● Caution: Only use products intended for stainless steel. Do not use solvents or abrasive
products.
BENEFITS OF STAINLESS STEEL OVER OTHER MATERIALS
● Elegant, clean, and modern finishes
● High-quality stainless steel
● Durable for indoor and outdoor use
● Easy to install
ORDER AT HOMEDEPOT.COM