Operation Manual

17
set All locales for the detection region；click icon，will clear setting detection region；
click icon，save setting；click button,exit from current interface.
User can setup all channels with same parameters, please tick off “All”, and then to
do relevant setup.
Click “Default” button to resort default setting; Click “Apply” button to save the setting;
click “Exit” button to exit current interface.
2.4.5.3 Video loss
Pic 2-24 Video loss
Click“Alarm handling”button，turn to window as below：
Pic 2-25 Video loss - alarm handling
The setup steps of video loss trigger are familiar with alarm handling.
User can also setup all channels with same parameters，。click “Apply” button to save
the setting; click “Exit” button to exit current interface.
Click “Default” button to resort default setting；
Disconnected from the network: when the network connection is disconnected, the system
will automatically sent E-mail to the user specified mailbox about the network
disconnected.
2> Buzzer
At buzzer interface，tick off Buzzer, set buzzer alarm hold time
2.4.6 Network configuration
Network configuration includes four submenus: network, sub stream, Email and other
settings.