Operation Manual

8
4 NVR Startup
4.1 System Initialization
After connecting the device to the display, plug in the mouse, power
cable and turn on the power switch on the rear panel, then start up the NVR.
The system initialization interface is as shown in Picture 4-1.
Picture 4-1
Notes: The insert figures in this user manual may not be the same as
what you see on display. All figures here are just for reference.
4.2 Preview Interface
After the system is fully booted, it will enter into the default preview
interface, shown in Picture 4-2.
Picture 4-2
After the device normally starts up, the default setting is to preview in