Operation Manual

multi-screen display mode. Products with different channels has different

amount of split screens to display. On the preview interface, you can set the

appropriate date and time. On the bottom left of the screen, it shows the

recording status of each video channel or alarm status icon.

: this icon means monitoring channel is recording;

: this icon means monitoring channel is in motion detection.

4.3 Preview Control

When the mouse moves within the region of the current preview

channel above the middle of the screen,the control bar will pop up as

shown in Picture 4-3.

Picture 4-3

1.Instant replay

In the preview desktop,you can play back the video of the current

channel.

2.Area amplification function

Amplification on the current channel region.Unchecked interface

display ， Unchecked .Once selected,the local preview may

enlarge,drag the mouse to see the enlarged picture.

3.Real-time backup

Backup real-time video of the current channel to USB2.0 device.

Device can only backup one channel real-time video.Checked the current

channel,interface display .Real-time backup does not start,Unchecked

the current channel,Real-time backup does not start ,If the real-time

backup has started, then the channel is not being backed up display .

4.Quickly add remote device

Recall the remote device connection interface.

4.4 Quick adding function

At the preview menu, for the channel of unconnected IP Camera, you

can quickly click the “+” icon to add the camera device when your mouse

move to the middle of the channel menu. As shown in picture 4-4 and 4-5.