Operation Manual

18
Picture 5-10
 System Time : System date and time of NVR.
 Default Language : the default language of the system boot, which is
English, but, at present, also supports Chinese, Polish, Czech, Russian,
Thai language, Hebrew, Persian, Bulgarian, Arabic, German, French,
Portuguese, Turkish, Spanish, Italian, and Hungarian.
 Record Mode : Overwrite automatically, ie., NVR will automatically
cover the previous record if hard disk is full.
 Device ID : Reserved.
 Video Standard : PAL or NTSC.
 Standby Time: It means standby time of system without operation for
NVR. If time exceeds the standby time, then you should re-login in
system so as to operate NVR. Default standby time is 30 minutes. And
standby time range is: 1 to 120 minutes.
 Default : Restore all specifications or parameters of common setup to
be factory default specifications.
 Save: To save specifications or parameters of common setup.
 Cancel : Return to the former interface.
The option Time Sync enables network time sync. Click Modification
button and the Time Sync setup interface will pop up like diagram 5-11.
Then type in the IP address of Time NTP Server, choose the Time Zone where
the device locates and click OK to save it.