Operation Manual

20
 Frame Rate: P type: 1 frames / sec-25 frames / sec; N type: 1frames /
sec-30frames / sec.
 Stream type: Select video stream or audio stream..
 Bit Rate: Setting bit rate can change the picture quality, the larger the
bit rate and the better the picture quality.
 Default: Recover all the encoding parameter to default values.
 Save: Save the parameters on preview configuration menu.
 Cancel: Return to the former interface.
5.3.3.3 Rec Setup
Click “Rec Setup” icon under “Sys Setup”, switch to interface as Picture
5-13 shows.
Picture 5-13
 Channel: Select a channel to record. There are 2 choices: single
channel and all channel. A specific channel should be chosen for
choice of single channel.
 Enable: Make enable is open. Default enable is closed.
 Week: Select a certain day in a week or every day to record.
 All Day: Record the whole day. Default set is closed.
 Period: If not all day record, then any four periods can be set to record
during the periods.
 Default: Restore parameters of record setup to be default ones.
 Save: Save parameters of current interface.
 Cancel: Return to the former interface.
5.3.3.4 Network
Click “Network” icon under “Sys Setup”, switch to interface as Picture
5-14 shows.