Operation Manual

21
Picture 5-14
 DHCP: after selecting the option, set the access mode of the local IP
address to be automatic access, or you should manually set up the IP
address.
 IP Address: IP address of NVR.
 Subnet Mask: Subnet mask of NVR.
 Default Gateway: Default gateway of NVR.
 TCP Port: Reserved.
 RTSP Port: RTSP data port of NVR.
 HTTP Port: Port for visit by IE browser for NVR.
 Primary DNS: It is usually offered by local ISP. Your IP address of domain
name server is entered here.
 Secondary DNS: Start secondary DNS when the primary one does not
work.
 Broadcast: Reserved.
 MAC Address: MAC address of NVR.
 Default: Restore all parameters of network setup to be defaulted ones.
 Save: Save parameters of common setup interface.
 Refresh: clicking Save to save the parameters to the device after
finishing all the parameters setup and click Refresh to acquire the latest
configuration information of the device.
 Cancel: Cancel the set Network of current interface.
Click the Email Setup in the Network Setup to enter the Email Setup
interface. When warning information appears in the interface, one can
send mails to the designated mail address. The interface is like the following
diagram 5-15.