Operation Manual

22
Picture 5-15
 SMTP server: the address of the mail server, which can be an IP address
and a domain name (domain name needs the confirmation of the
correct DNS setup to be resolved correctly).
 Port: port number of the mail server.
 Enable: enabling the mail sending function.
 Anonymity: port number of the mail server..
 User name: user name of the sender’s mail.
 Password: password of the corresponding user name.
 Receiver: the warning information can be sent to the designated
receiver via mail.
 Sender: setting the EMAIL address of the mail sender.
 Theme: the theme of the mail can be set by yourself.
 File: when motion detection cooperation is enabled, picture file would
be uploaded at the same time if warning information appears.
 Encryption Type: enabling SecureSocketLayer port when logging in the
mail server.
 Interval: interval for sending the alarm mail.
 Health enable: healthy mail can be checked whether linked
successfully or not through automatic testing message from the system.
 Health interval: interval for sending healthy mail.
 Default: setting all the parameters in the Email Setup interface to be
default.
 Save: saving the parameters in the Email Setup interface.
 Return: going back to the former management interface.
5.3.3.5 Alarm in
This function is unavailable.