Operation Manual

29
stage, in order to connect devices accordingly, as shown in Figure 5-26.
Picture 5-26
 search: Search the IPC devices supported with onvif protocol.
 Add: Click , appearing “√” icon means you have selected the IPC
device of this column. If the “Device Added” list is not full, click the
“Add” and can put this device to the “Device Added” list. Select all
searched IPC device,If the “Device Added” list is not full, you can click
“Add” after you click “Select All” to add the all the devices to the
“Device Added” list.
 Filter: Filter the display of the searched device list.
 Delete: clicking in the added devices and clicking Delete, then
you can delete the device chosen.
 Confirm: Return to last menu.
 Return: Return to last menu.
Remark: Click on the title bar icon , select all the available IPC
device, click again to cancel all selected. Click the icon can quickly
delete the device at the “Device Added” list.
5.3.4.1 Manual Add
Click Manual Add on the left in the Remote Device menu and
channels can be set up manually, like diagram 5-27 below.