Operation Manual

31
Picture 5-28
5.3.5.1 Disk
Click “Disk” icon under “Advance Option”, will switch to the interface of
Disk Manage, as shown in Picture 5-29.
Picture 5-29
If the devices have connected the HDD successfully, the HDD manage
list will show the information of HDD.You have to format the HDD if the HDD is
the first time to connect; If the system detects that do not need to format
the hard disk, the HDD status will displays “normal”; If do not connect
successfully or could not detect hard disk, will displays the warning “Not
connected the HDD”.
 HDD No.: The number of HDD that connect the system.
 State: Detect the current working status of HDD, you could use only
that displays “normal”; After formatting is completed, you need to
restart NVR, the status displays "in use".