Operation Manual

32
 Total Capacity: The total available HDD capacity, the single HDD
capacity can not exceed the maximum capacity: 4TB.
 Residual Capacity: Display the residual capacity of the current HDD;
 Device Type: SATA.
 Refresh: Refresh HDD information in the list;
 Format: Formatting the HDD, select the HDD that needs to be
formatted firstly, and then click the "Format" button, pop-up warning
dialog "formatting will result in the selected HDD recording data loss,
confirm that you want to continue?", If confirm to format then click on
the "OK" button, otherwise click "Cancel".
 Return: Return to the former management interface.
Note: After formatting the HDD, you need to restart the device.
5.3.5.2 User
Click “User” in “Advance Option” interface, then interface of user
management will be out. As followed picture 5-30 shows.
Picture 5-30
 User List: List added users. “admin” is super user/administrator, and we
cannot change its privilege, but only its password. Other general users
have no privilege of adding, modifying or deleting.
 Privilege: Privilege list of users. It includes PTZ control, playback,
parameter setup, query log, advanced configuration, channel
management, query parameter, backup /shut down/ logout.
 Add: To add a new user, which can be only done by super
administrator--admin. Click “Add”, then enter user name and
password, select privilege and save the parameters.
 Modify: To change information of users, which can be only done by
super administrator--admin. First, choose a user, click “modify”, then
enter old password and new password, modify privilege, and finally
save the parameters.