Operation Manual

39
Figure 6-4, setting up the current system time of device, date, system
language, display resolution and other information.
Parameter Specification
System Time Set up the system time of device than saving.
Default
language
Set up the device language, you can change the
language as you need.
Record Model
Can be set to automatically overwrite when the hard
disk is full.
Device ID Reserved.
Video
Standard
The video standard of device must be same with the
IPC.
Resolution HDMI and VGA output resolution of device can be set.
Standby time
Lock time of local time can be set，the time is 1-120
minutes.
6.4.1.2 Network
Picture 6-5
Figure 6-5, the IP address, Subnet Mask, Gateway, DNS, TCP port, Data
port, HTTP port and related parameters of the device can be set by the
interface.
Related parameters setting consistent with NVR client; The IP address
effects at once after you modify, don’t need restart NVR device.