Operation Manual

41
6.4.1.5 DDNS Setup
Picture 6-8
Figure 6-8, the NVR can be set up remotely via domain name through
this interface and the relevant parameters setup should be the same with
the NVR port.
After determining the date in this interface, videos of associated
channels can be checked according to the video types. Relevant
parameters should be the same with the NVR port.
6.4.2 Channel
6.4.2.1 Channel Setup
Picture 6-9
Figure 6-9, you can add or modify channel parameters by channel
configuration interface; Click“search”, you can search IPC device with
Onvif protocol with the same network segment with NVR; Selecting the
channel number on configuration interface, click the IPC information you
search, the channel parameters of the interface will change accordingly,
the setting channel parameter settings will become effective after you click
the “save".
6.4.2.2 Encode
The interface of encoding parameters as below Picture 6-10, relevant