User`s manual

7
Basic Operations
Basic Playback
Turn on the BDK-2000.
After a few moments the initial menu screen
will appear.
Loading A Disc
1. Press EJECT to open the disc tray.
2. Place a disc in the disc tray.
3. Press EJECT to close the disc tray.
4. The disc will play automatically.
If A Menu Is Shown On The TV Screen
When inserting a DVD or VCD disc, a menu
may be displayed before playback. From the
menu, you may select a desired item to be
played back.
For DVD Video
1. Use the arrow buttons to select the
track desired
2. Press ENTER and the player will playback
the selected track.
For DVD and Video CD
Use the numeric buttons or directional buttons
to navigate and select a desired item:
Confirm using the ENTER button to playback.
For CDG and USB
1.Using the numeric buttons, enter the desired
file or track number and press ENTER to
confirm and begin playback.
You may create a Playlist by:
1. Pressing the Green function button on the
remote control to reserve song(s)
2. Open the playlist by pressing the Yellow
function button
3. Sort the order preference by moving tracks
up the playlist using the Green function button
Note: To End Playback
Press STOP to end playback.
To Resume Playback
On DVDs and VCDs, you can resume playback
by pressing the PLAY button.
To Stop Playback Completely
Press the STOP button twice. Now when you
press the PLAY button, it will begin from the
beginning of the disc. Also, if you eject the
disc, the playback completely stops and ejects
the disc.
To Pause Playback
Press the PAUSE button to pause playback.
To resume, press either the PLAY or PAUSE
button.
Note: *Do NOT insert a damaged disc.
*If a disc takes more than usual to read or the
DISPLAY WINDOW shows LOAD for an
extended period of time, press EJECT on the
remote or from the front of the unit and check
disc for any dirt/fingerprints or defects.
To Advance Or Reverse Playback While
Viewing
During playback on DVDs and VCDs, press
FAST FORWARD>> or FAST BACKWARD<<
on the remote unit. You can select from 2
times, 4 times, 8 times, 20 times the normal
playback speed.
Karaoke - USING MICROPHONE
The system has 2 microphone inputs. Connect
up to 2 microphones to this player.
Karaoke - MICROPHONE MIXER
When a microphone is plugged into MIC1 or
MIC2, the system mixes the music with your
voice.
1. Press POWER button to turn on the system.
2. Load a Karaoke Disc.
3. Press PLAY button to start playing.
4. Adjust MASTER VOLUME buttons on the
remote controller or the MASTER VOLUME
KNOB on the front panel.
5. Adjust the individual microphone volumes
with the Mic. Volume Knobs on the front
panel.
6. Starting singing while the song is playing.
7. Adjust ECHO level with the ECHO Volume
Knob on the front panel to the desired echo
level.
Changing the Batteries in the Remote
The battery compartment is located on the
back of the remote control.
1. Open the lid of the remote control battery
compartment.
2. Put 2 AAA batteries
Make sure that the batteries are put with the
positive and negative terminals in the correct
direction corresponding to the (+) and (-)marks
in the battery compartment.
3. Install the lid of the remote control battery
compartment.