Instruction manual

7
3
BASIC OPERATION
2
3
■ Channel selection
DD
Channel 16
Channel 16 is the distress and safety channel. It is used for
establishing initial contact with a station and for emergency
communications. Channel 16 is monitored during both Dual-
watch and Tri-watch. While standing by, you must monitor
Channel 16.
➥ Push [!6•9] momentarily to select Channel 16.
➥ Push [CH/WX] to return to the condition before selecting
Channel 16, or rotate [SELECTOR] to select a channel.
• Pushing the keypad or [
YY
]/[
ZZ
] on the microphone also selects a
channel.
Convenient!
When the Favorite channel function is turned ON (p. 45),
[Y]/[Z] keys on the microphone select the favorite channels
in the selected channel group in sequence when pushed.
• The favorite channels are set by the TAG channel setting. (p. 15)
DD
Channel 9 (Call channel)
Each regular channel group has a separate leisure-use call
channel. The call channel is monitored during Tri-watch. The
call channels can be programmed (p. 10) and are used to
store your most often used channel in each channel group for
quick recall.
➥ Push and hold [!6•9] for 1 sec. to select the call channel of
the selected channel group.
•“
CCAALLLL
” and call channel number appear.
• Each channel group may have an independent call channel after
programming a call channel. (p. 10)
➥ Push [CH/WX] to return to the condition before selecting
call channel, or rotate [SELECTOR] to select a channel.
• Pushing the keypad or [
YY
]/[
ZZ
] on the microphone also selects a
channel.
25W25W INTINT CALLCALL
TAGTAG
3434°34.506N34.506N
123123°23.236W23.236W
UTCUTC 1212:00:00 CALLINGCALLING
Push
for 1 sec.
9
16
25W25W INTINT
TAGTAG
3434°34.506N34.506N
123123°23.236W23.236W
UTCUTC 1212:00:00 CALLINGCALLING
Push
9
16
IC-M604-1.qxd 06.7.20 5:55 PM Page 7 (1,1)