Instruction manual

16
DSC OPERATION
New2001New2001
6
■ MMSI code programming
The 9-digit MMSI (Maritime Mobile Service Identity: DSC self
ID) code can be programmed at power ON.
This code programming can be performed only twice.
q While pushing and holding [MENU], push [POWER] to
enter MMSI code programming condition.
• Turn power OFF in advance.
w After the display appears, release [MENU].
e Enter “
MMMMSSII cchheecckk
” in DSC Set up menu.
r Edit the specific MMSI code directly with the keypad.
• Rotate [SELECTOR] to move the cursor backward or forward.
t After entering the 9-digit code, push [ENT] to set the code.
• Returns to the DSC set up menu.
y Push [CLR] or rotate [SELECTOR] to select “
EExxiitt
,”
push [ENT] to return to DSC menu.
• Repeat again to return to the normal operation condition.
■ DSC address ID
A total of 100 DSC address IDs can be programmed and
named with up to 10 characters.
DD
Programming Individual ID
q Enter “
AAdddd::IINNDDVV IIDD
” in DSC Set up menu.
w Set the individual ID and ID name directly with the keypad.
• Edit the 9-digits of the appropriate distress ID directly with the
keypad.
• Rotate [SELECTOR] to move the cursor backward or forward.
• Push [CE] to clear the ID and name.
• Push [CLR] to cancel and exit the condition.
e Push [ENT] to program and return to the DSC set up
menu.
r Push [CLR] or rotate [SELECTOR] to select “
EExxiitt
,”
push [ENT] to return to DSC menu.
• Repeat again to return to the normal operation condition.
--DSC Menu--
Add:Individual ID
Input 9 digits
_________
Input name
_________
<CLR˘Exit / ENT˘OK>

DDSSCC MMeennuu
 ➪ 
SSeett uupp
 ➪ 
AAdddd::IINNDDVV IIDD

(Push [MENU]) (Rotate [SELECTOR], then push [ENT].)
--DSC
--DSC
Menu--
Menu--
MMSI Check
MMSI Check
_________
_________
<CLR
<CLR
˘Exit
Exit
/ ENT
ENT
˘OK>
OK>

DDSSCC MMeennuu
 ➪ 
SSeett uupp
 ➪ 
MMMMSSII CChheecckk

(Push [MENU]) (Rotate [SELECTOR], then push [ENT].)
IC-M604-1.qxd 06.7.20 5:55 PM Page 16 (1,1)