Instruction manual

22
6 DSC OPERATION
New2001
e The position information appears. Edit your position (lati-
tude and longitude) data directly with the keypad.
• Push [6•MNO] to edit N; North latitude or [7•PRS] to edit
S; South latitude.
• Push [3•DEF] to edit E; East longitude or [9•WXY] to edit
W; West longitude.
• Rotate [SELECTOR] to move the cursor backward or forward.
• Push [CE] to clear the position data.
• Push [CLR] to cancel and exit the condition.
r After editing the position data, push [ENT] to set. Then edit
the current UTC time with the keypad, push [ENT].
• Edit the digit of the current UTC time directly with the keypad.
• Rotate [SELECTOR] to move the cursor backward or forward.
• Push [CE] to clear the time.
• Push [CLR] to cancel and exit the condition.
t Push [DISTRESS] for 5 sec. to transmit the Distress call.
• While pushing [DISTRESS], the key backlighting blinks.
• The selected nature of the distress is stored for 10 minutes.
y After transmitting the Distress call, the transceiver waits for
an acknowledgment call on Channel 70.
• The Distress call is automatically transmitted every 3.5 to 4.5
min.
• After 2 sec., the transceiver is set to Channel 16 automatically.
Distress Call
TX Complete
Now Waiting for ACK
<CLR<CLR˘Cancel>Cancel>
After 2 sec.
25W INT
TAG
Wait ACK
<CLR ˘
Cancel> CALLING
--DSC Menu--
Input UTC Time
__:__ Null
<CE<CE˘NullNull Data>Data>
<CLR<CLR˘ExitExit / ENTENT˘OK>OK>
--DSC Menu--
Input Position
Latitude
__°__.___N Null
Longitude
__°__.___W Null
<CE<CE˘NullNull Data>Data>
<CLR<CLR˘ExitExit / ENTENT˘OK>OK>
IC-M604-1.qxd 06.7.20 5:55 PM Page 22 (1,1)