Instruction manual

27
6
DSC OPERATION
New2001
6
DD
Transmitting an All Ships call
Large ships use Channel 70 as their ‘listening channel.’ When
you want to announce a message to all ships within range,
use the ‘All Ships Call’ function.
q Enter “
AAllll SShhiippss CCaallll
” in DSC menu.
w Rotate [SELECTOR] to select the desired category, push
[ENT].
• Output power of ‘Routine’ category is 1 W (low power) only.
• The selectable category may differ according to the programmed
setting. Ask your dealer for the available categories.
e Push [ENT] to transmit the All ships call.
• Channel 70 is selected and the All ships call is transmitted.
r After the All ships call has been transmitted, the following
indication is displayed.
t Push [CLR] to exit and the transceiver selects Channel 16
automatically.
• Even if [CLR] hasn’t been pushed, the transceiver automatically
selects Channel 16 after 2 sec. inactivity.
All Ships Call
TX Complete
<CLR˘Exit>
--DSC Menu--
Select Category
˘Routine
Safety
Urgency
<CLR˘Exit / ENT˘OK>
--DSC Menu--
All Ships Call Ready
<CLR˘Exit / ENT˘OK>

DDSSCC MMeennuu
➪
AAllll SShhiippss CCaallll

(Push [MENU]) (Rotate [SELECTOR], then push [ENT].)
IC-M604-1.qxd 06.7.20 5:55 PM Page 27 (1,1)