Instruction manual

29
6
DSC OPERATION
New2001
6
DD
Transmitting a Position Report call
Transmit a Position Report call when you want to announce
your own position to a specific ship and to get an answer, etc.
q Enter “
PPoossiittiioonn RReeppoorrtt
” in DSC menu.
w Rotate [SELECTOR] to select the desired pre-pro-
grammed individual address or “
MMaannuuaall IInnppuutt
,” push
[ENT].
• The ID code can be set in advance. (p. 16)
• When “
MMaannuuaall IInnppuutt
” is selected, set the 9-digit MMSI
number for the individual you wish to call with the keypad.
When a GPS receiver (NMEA0183 ver. 2.0 or 3.01) is con-
nected, next steps e and r (Current position/time pro-
gramming) do not appear. Go to step t.
e The position information appears. Edit your position data
(latitude and longitude) directly with the keypad. (p. 18)
r After editing the position data, push [ENT] to set. Then set
the current UTC time directly with the keypad, push [ENT].
t Push [ENT] to transmit the Position Report call.
• If Channel 70 is busy, the transceiver stands by until the channel
becomes clear.
y After the Position Report call has been transmitted, the fol-
lowing indication is displayed.
u Push [CLR] to return to the previous indication before en-
tering the DSC menu.
• Even if [CLR] hasn’t been pushed, the display automatically re-
turns to the previous indication after 2 sec. of inactivity.
Position Report
TX Complete
Now Waiting for ACK
<CLR˘Exit>
--DSC Menu--
Position Report Ready
<CLR˘Exit / ENT˘OK>
--DSC Menu--
Select Address
Manual Input
John
˘Paul
George ≥
<CLR˘Exit / ENT˘OK>

DDSSCC MMeennuu
➪
PPoossiittiioonn RReeppoorrtt

(Push [MENU]) (Rotate [SELECTOR], then push [ENT].)
IC-M604-1.qxd 06.7.20 5:55 PM Page 29 (1,1)