Instruction manual
35
6
DSC OPERATION
New2001
6
DD
Receiving a Polling Request call
While monitoring Channel 70 and a Polling Request call is re-
ceived:
➥ “
RReecceeiivveedd PPOOLLLL RREEQQ
” appears in the display.
➥ Push [CLR] to stop the beep, then push [ENT] to reply to
the call; push [CLR] to ignore the call.
DD
Receiving a Position Reply call
While monitoring Channel 70 and a Position Reply call is re-
ceived:
➥ “
RReecceeiivveedd PPOOSS RReeppllyy
” appears in the display.
➥ Push [CLR] to stop the beep, then push [ENT] to display
the position information; push [CLR] to ignore the reply
call.
DD
Receiving a Position Report Reply call
While monitoring Channel 70 and a Position Report Reply call
is received:
➥ “
RReecceeiivveedd PPOOSS RReeppllyy
” appears in the display.
➥ Push [CLR] to stop the beep, then push [ENT] to display
the position information; push [CLR] to ignore the reply call.
DD
Receiving a Polling Reply call
While monitoring Channel 70 and a Polling Reply call is re-
ceived:
➥ “
RReecceeiivveedd PPOOLLLL RReeppllyy
” appears in the display.
➥ Push [CLR] to stop the beep, then push [CLR] again to exit
the condition.
25W INT
TAG
Received
POLL Reply
<Paul
<CLR
˘
Beep Off> SAFETY
25W INT
TAG
Received
POS Reply
<Paul
<CLR
˘
Beep Off> SAFETY
25W INT
TAG
Received
POS Reply
<Paul
<CLR
˘
Beep Off> SAFETY
25W INT
TAG
Received
POLL REQ
<Paul
<CLR
˘
Beep Off> SAFETY
IC-M604-1.qxd 06.7.20 5:55 PM Page 35 (1,1)