Instruction manual

46
CONNECTIONS AND MAINTENANCE
New2001New2001
9
■ Connections
q ANTENNA CONNECTOR
Connects a marine VHF antenna with a PL-259 connector
to the transceiver.
CAUTION: Transmitting without an antenna will dam-
age the transceiver.
w MICROPHONE CONNECTOR
Connect the supplied microphone only.
CAUTION: NEVER connect other microphones here,
such as the optional HM-157/HM-162, for they may
cause damage to the transceiver.
e HAILER/FOGHORN CONNECTOR
Connects a hailer speaker (30 W nominal at 13.8 V/ 4 Ω).
r EXTERNAL MICROPHONE CONNECTORS
[COMMAND MIC-1]/[COMMAND MIC-2]
Connects the optional COMMANDMIC™ (HM-157/HM-
162.)
CAUTION: NEVER connect other microphone here,
such as the HM-134, may cause damage to the trans-
ceiver.
t GPS RECEIVER/EXTERNAL SPEAKER CONNECTOR
➥ Connects a GPS receiver for position and time indica-
tions.
• An NMEA0183 ver. 2.0 or 3.01 (sentence formatters RMC,
GGA, GNS, GLL) compatible GPS receiver is required. Ask
your dealer about suitable GPS receivers.
➥ Connects a PC or navigation equipment (NMEA0183
ver. 3.01 sentence formatters DSC, DSE compatible) for
plotting received other ships position data.
➥ Connects an external speaker.
NOTE: Attach the supplied connector covers to w, e, r
or t when they are not in use.
NMEAOUT (+)
NMEAOUT (–)
NMEAIN (+)NMEAIN (–)
SP (+)
SP (–)
Transceiver’s rear panel view
HAIL (+)
HAIL (–)
NC
Transceiver’s
rear panel view
y
q
r
t
w
e
IC-M604-1.qxd 06.7.20 5:55 PM Page 46 (1,1)