Instruction manual

9 CONNECTIONS AND MAINTENANCE

New2001

■ Mounting the transceiver

Using the supplied mounting bracket

The universal mounting bracket supplied with your transceiver

allows overhead or onboard mounting.

• Mount the transceiver securely with the 4 supplied screws

(M5 × 20) to a surface which is more than 10 mm thick and

can support more than 5 kg.

• Mount the transceiver so that the face of the transceiver is at

90° to your line of sight when operating it.

CAUTION: KEEP the transceiver and microphone at least

1 meter away from your vessel’s magnetic navigation com-

pass.

NOTE:

• Check the installation angle; the function display may not

be easy-to-read at some angles.

• When mounting the transceiver on the place that is prone

to strong vibration, use the supplied sponges between the

transceiver and mounting bracket for reducing the effect

of the vibration.

• OVERHEAD MOUNTING

• MOUNTING ON THE BOARD

Sponges reduce the

vibration effects.

See NOTE at left.

These screws are shown

a mounting example only.

Not supplied with acces-

sories.

Sponge*

IC-M604-1.qxd 06.7.20 5:55 PM Page 48 (1,1)