User's Manual

Get Ready for Testing
15
Presetting Date/ Time/ Unit
Please pre-set your meter whenever you insert or replace the batteries. See
following steps for details.
1
Under Standby Mode, press and hold M button
for 3 seconds to enter Setting Mode.
Note: After battery replacement, meter
automatically activates Setting Mode.
2 When YEAR digits flash, press S button to
select current year. When done, press M
button to confirm.
To complete date and time settings, repeat
above steps by setting MONTH, DATE,
HOUR and MINUTE in sequence.
3
After setting the correct year, select
preferable unit by pressing S button. When
done, press M button to confirm.