Instructions / Assembly

We hope you enjoy your new purchase!

If you have any questions regarding this product or the instructions

Please call Achim’s Family of Home Furnishings

Customer Service at 1-800-54-ACHIM

Visit our website at www.achimonline.com

Made in China

V-18

Safety instructions

The airbed is designed for home use.

The airbed must not be used as a trampoline - risk of damage.

Take care with sharp objects and uneven surfaces – risk of damage.

Always place a tarpaulin between floor and airbed for ideal protection.

Check for seal tightness before use.

This inflatable product is not designed for use in water and must not be used as a

buoyancy aid for children or non-swimmers!

General information:

Every airbed may lose some of its air over time. The amount of air loss depends on

the material, environmental factors and intensity of use. This is not a flaw in the

material but a normal process with this type of material. Please replenish air as

required.

Operating instructions:

Inflation

1. Unfold your product and lay flat. Make sure the flocked side is upturned during

the inflation.

2. You can use foot or hand pump (not included) to inflate the airbed.

TIP: How to use the 2-in-1 inflatable valve

 Pull out the base valve from the main chamber, open the top stopper of the valve

（See A）.

 Insert the inflation hose and inflate the chamber（See B）. Once inflation is finished,

insert the top stopper to the base valve（See C）.

PAGE 1
We hope you enjoy your new purchase! If you have any questions regarding this product or the instructions Please call Achim’s Family of Home Furnishings Customer Service at 1-800-54-ACHIM Visit our website at www.achimonline.com Made in China V-18 Safety instructions The airbed is designed for home use. The airbed must not be used as a trampoline - risk of damage. Take care with sharp objects and uneven surfaces – risk of damage. Always place a tarpaulin between floor and airbed for ideal protection.
PAGE 2
WARNING: Do not use air compressor or high pressure pumps. Do not over inflate: excessive inflation of the air chambers can cause the chamber to burst or cause damage to the welding seams. Deflation Pull out the base valve from the bed (C), open the cover (B) and take out the stopper to release air (A). Do not to puncture your Airbed. Do not force air out of the Airbed. Allow air to escape slowly and naturally. Fold carefully and re-insert into the package.
PAGE 3
Cleaning and storage: After use, the airbed must be cleaned of dirt using a (damp) cloth. Use a mild detergent for cleaning if necessary. Do not scrub. Then leave to dry in the air before completely deflating all chambers. Now fold up the airbed and store it in a dry, frost-free location. When folding up make sure there are no severe kinks in the material.