Installation Guide

ManualsBrandsAchim ManualsCurtain Rods & HardwareDylan 36 in. L - 66 in. L Innovative Wrap Around Curtain Rod in Brushed Nickel

SWING ARM ROD INSTALLATION GUIDE

STEP 1.

Remove swing rod from bracket by lifting rod

upward.

STEP 2.

Place bracket against wall at desired location

and mark screw holes.

STEP 3.

If mounting to drywall or paneling, pre-drill

two pilot holes (3/16” drill bit) and insert

anchors into wall and insert screws into wall

anchors. If mounting directly into wood or

studs, pre-drill two pilot holes (3/16” drill bit)

and install bracket on the wall with screws

provided.

STEP 4.

Re-install the swing rod in the bracket.

Loosen the set screw to extend rod to

desired length.

STEP 5.

Complete installation by retightening the set

screw.

Tools needed:

Philipshead

Screwdriver

Tape Measure

Drill & Bit Set

Pencil

Level

drywall or panelling wood or studs

Summary of content (1 pages)