Installation Guide

1) Attatch vertical sections to the

crown plate with provided hardware.

Screw length is the same across the product.

BOTTOM

IS CROSS WITHOUT

SQUARE SHELF

DETAIL A

SCALE 1 : 8

5) STACK THE LEAVES ON TOP

OF EACH OTHER SO THE HOLES

LINE UP AT THE BOTTOM. SLIDE

THE LEAF ROD THROUGH AND

THREAD THAT INTO THE CROWN

PLATE.

Completed

Topiary Frame

2) Attach the top shelf

to the vertical sections with

provided hardware at each corner.

4) Attach the next two

shelves in the same manner.

TF-02 ASSEMBLY INSTRUCTIONS

PAGE 1
TF-02 ASSEMBLY INSTRUCTIONS 1) Attatch vertical sections to the crown plate with provided hardware. Screw length is the same across the product. BOTTOM IS CROSS WITHOUT SQUARE SHELF 4) Attach the next two shelves in the same manner. all content by ACHLA Designs © 2014 2) Attach the top shelf to the vertical sections with provided hardware at each corner. 5) STACK THE LEAVES ON TOP OF EACH OTHER SO THE HOLES LINE UP AT THE BOTTOM. SLIDE THE LEAF ROD THROUGH AND THREAD THAT INTO THE CROWN PLATE.