User manual

Digital Video Recorder User Manual
21
3.1
3 Basic Function Instruction
Power On/Off
Before you power on the unit, please make sure all the connection is good.
3.1.1 Power on
Step1: connect with the source power; switch on the power button near the power port on the rear panel
Step2: the device will be loaded, and the power indicator will display blue
Step3: before start, a WIZZARD dialogue box will be pop-up (refer to below picture) and show some information about time
zone and time setup.
After the device power on, if there is no menu or only has live image display, user can long press ESC button to switch.