Instruction Manual

29
Trigger-Outputs:
1st Trigger Out:
The 1
st
Trigger Out gives out a 12V impuls (10ms) at the first step of a pattern.
This Trigger can be used to reset counters or LFOs(Reset In).
16`` Trigger Out:
The 16`` Trigger Out gives out a 12V impuls (10ms) on every 1/16 and can be used
to trigger and synchronise counters.
The timing is independent from the shuffel-settings.
You can invert this trigger by changing the jumpersetting on the backside of the PCB-
board.