Manual

13
Zustand LED
buttom
- Octave + Octave
Octave-Offset
Octave + off flashes + 2 Octaves
Octave + off constant on + 1 Octave
--- off off ----
Octave - constant on off - 1 Octave
Octave - flashes off - 2 Octaves
As described in the table, it is possible to shift the pitch of each note with the buttoms
Octave Up/Down between the 5 octaves. Without the Octave Up/Down buttons it is
always programmed in the middle octave (no LED lights).
In the Pattern Tap Write mode, only one step is edited and indicated!
Programming Pattern Length ( Pattern Write Step Mode)
When you press the buttom Lenght, the LEDs 1-8 of the row light. Now you can
select the last step 1-8, and the pattern length of your active pattern. You press one
buttom 1-8 of the keyboard, and this step is selected as the last step of the pattern.
E.g. step 3. Now the Pattern repeats after the third step, and is 3 steps long. Press
the buttom Length twice, and the LEDs 9-16 lights. Now you can select the pattern
length between 9-16. The programmed pattern length is transferred to the other
modes. The not played steps stay in the memory.
The Pattern length programming is as in the Pattern TAP Write mode!
Roll Programmierung
With the roll function the starting point of a Pattern is shifted. The Pattern length
remains unaffected.